BOSCH GSR12V-140FCB22 套装 BATTERY (BAT414) - 维修与保养手册 维修手册
Bosch BAT414 12V 最大锂离子 battery 电池组的全面维修与保养说明，包括故障排除、安全和更换指导。
$39.99
最后更新 Aug 7, 2026, 6:10 AM
Manual information
关于本手册
Bosch BAT414 12V 最大锂离子 battery 电池组的全面维修与保养说明，包括故障排除、安全和更换指导。
报告的成功维修率 0%
Price
$39.99
完整手册包含
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
目录预览
- Bosch Gsr12v-140fcb22 套件 Battery (bat414) - 维修与保养手册
- 最重要的六件事
- 本型号实际具备的功能
- 指示器和信号映射
- 型号修订警告
- 充电与电力路径
- 正常使用顺序
- 看似故障的正常行为
- 本型号不具备的功能
- FM-10 外壳、插杆、释放标签、端子、隔板或电池组本体损坏或膨胀
- 普通负载
- FM-11 BATTERY 曾受潮、浸没或暴露于导电或腐蚀性液体
- 移动相关故障
- FM-08 BATTERY 异常发热，无烟、火花、泄漏或膨胀
- FM-15
This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.
可能根本原因
- The pack is discharged, too hot or cold, or in a protection state
- Terminal faces are dirty, wet, damaged, or not aligned
- The insertion stem stops before the electrical seat even though the pack looks inserted
- The sealed cell, conductor, terminal, or protection path has failed
- The comparison tool, rather than the battery, has failed
- The application is binding, stalled, overloaded, or using a damaged bit or attachment
- The pack is near empty, overheated, overcooled, or in protection
- Dirty or resistive contacts heat or interrupt current
- The sealed cell, conductor, temperature, or protection path is weak
- The tool has abnormal drag or its own electronic fault
- The battery is not fully charged or is at an extreme temperature
- Contact resistance from dirt, wear, or damage limits current
- The bit, attachment, fastener, or work interface is binding, dull, damaged, or overloaded
- The sealed cells or internal links have lost power capability
- The tool motor or controller is weak
- The pack has aged or lost usable cell capacity
- The full indication came from a charger or contact problem
- Cold, heat, a heavy drill/driver task, or tool drag raised energy demand
- Dirty contacts created loss and heat
- The comparison task or tool condition was not equivalent
- The sealed cells have high self-discharge or an internal leakage path
- The pack was not actually full before storage
- Storage was hot, wet, conductive, or near metal
- The battery was left in a tool that drew standby current
- The comparison interval or starting state was not controlled
- The insertion stem, guide surfaces, or seating stops are worn, dirty, or distorted
- Battery contacts are recessed, contaminated, loose, or damaged
- The charger contact carrier or slot is damaged
- The release tabs or seating geometry do not hold the electrical interface
- An internal battery terminal link is movement-sensitive
- The tool or work is stalled, overloaded, or binding
- Charging or use occurred in a hot environment with poor ventilation
- Dirty or resistive contacts are generating heat
- The pack has an internal cell, conductor, or protection defect
- The charger or tool is driving an abnormal condition
- Internal cell short, thermal runaway, or conductor failure
- Severe impact, puncture, crushing, fire, or excessive heat exposure
- Liquid or conductive contamination caused a short
- Improper charger, adapter, direct terminal connection, or modification
- A damaged pack was charged or used
- Drop, impact, crushing, puncture, or tool/charger ejection
- Heat, age, internal gas generation, or cell swelling
- Forced insertion, prying, adapters, or release-tab abuse
- Conductive/corrosive contamination damaged contacts or barriers
- A prior repair or modification compromised the sealed housing
- Rain, hose, puddle, submersion, or wet storage
- Salt, pool, bleach, cleaner, or chemical exposure
- Liquid entered through the terminal area or housing seam
- The pack was placed in a wet charger or tool
- A user attempted washing or liquid cleaning
- One or both release tabs or a mating catch are jammed, broken, or loaded sideways
- Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
- The pack was forced, twisted, or inserted with an adapter
- The tool or charger housing is damaged
- The interface is still energized or the tool is under mechanical load
- Battery contacts are worn, recessed, contaminated, loose, or damaged
- The insertion stem or release tabs permit electrical movement even though retention feels secure
- The internal terminal link is movement-sensitive
- The tool contact carrier or wiring is damaged
- Hand pressure is masking an unsafe interface fault
- The outlet or charger has no power or is faulty
- The pack is outside the allowed charging temperature range
- Contacts or guides are dirty, wet, damaged, or not fully seated
- The charger is not designated for the battery platform
- The sealed cell, temperature, conductor, terminal, or protection path has failed
- Wrong battery platform, identity mismatch, or an adapter is being attempted
- Debris obstructs the insertion stem, guide surfaces, tool cavity, or charger socket
- The stem, guide rib, seating stop, housing, or mating cavity is distorted
- Contacts or insulating barriers are bent or displaced
- The tool or charger interface, rather than the battery, is damaged
- A side release tab is dirty, cracked, worn, broken, or not returning
- The mating catch in the tool is worn or damaged
- The insertion stem or guide geometry misaligns the retaining tabs
- The housing is distorted even though insertion is possible
- The pack was not pushed fully to the normal seated stop
支持的型号
相关型号
常见症状
充满电的电池组在短暂冷却干燥存放后变得无法使用，即使未放入工具或充电器。
查看详情
电池组被浸没、内部溅水、淋雨或暴露于盐水、漂白剂、氯或其他导电/腐蚀性液体。
查看详情
充电开始或停止时 battery 被移动或握持
查看详情
工具输出在牢固锁定的 battery 移动时断断续续
查看详情
电池组在充电、存储或正常使用时迅速或剧烈发热，但无主动排气、火焰、泄漏或明显膨胀。
查看详情
圆柱形电池组在兼容 Bosch 12V Max 工具或认证充电器中，未达到正常就位位置或需异常用力。
查看详情
外观正常的 battery 未进入正常充电周期，或正确就位后未达到充电器定义的完全充满指示。
查看详情
外观完好且完全插入的 BAT414 电池组在兼容 Bosch 12V Max 工具中无可用输出。
查看详情
电池组完全插入，但一侧或两侧释放卡扣未能固定，或电池组可在未按下两个卡扣的情况下被拉出。
查看详情
当触摸、移动、抬起或保持就位的 battery 时，充电器指示或充电周期发生变化。
查看详情
兼容工具正常启动后，在执行普通任务时突然失去所有 battery 输出，扳机仍保持按下。
查看详情
电池组完全或部分插入，但无法通过正常释放操作和直接拉出将其取出。
查看详情
工具继续运行，但电源持续低、波动或冲击，而非完全停止。
查看详情
完全就位且固定的电池组仅在某些位置为工具供电，或在工具或 battery 移动时中断，无正常过载停止。
查看详情
battery 正在冒烟、嘶嘶作响、排气、放电火花、燃烧、熔化、泄漏或温度迅速升高。
查看详情
battery 提供正常初始功率，但在相同普通任务中比同类健康的 2.0 Ah Bosch 12V Max 电池组更快耗尽。
查看详情
电池组出现裂纹、压碎、穿孔、烧毁、变形、膨胀、腐蚀，或接触点、隔板、插入柄或释放卡扣损坏。
查看详情
故障模式
摘要
完全插入且外观正常的 BAT414 battery 在兼容 Bosch 12V Max 工具中无可用输出。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 在存储和断开连接时快速失电，短暂冷却干燥存放后变得无法使用。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
当battery移动或保持在某些位置时，由于接触不稳定或电弧，充电间歇性开始或停止。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery在充电、存储或工具使用过程中迅速异常发热，但无烟雾、火花、泄漏或膨胀。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 活动危险，伴有烟雾、嘶嘶声、排气、火花、火焰、熔化或泄漏，表明热失控或严重损坏。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 暴露于水或导电/腐蚀性液体，导致损坏或不安全状况。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 完全或部分插入，但无法通过正常释放操作和直接拉出将其取出。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
工具启动，但在普通负载下battery输出突然中断，导致电源突然丢失。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 完全插入，但一侧或两侧释放卡扣未能固定，或无需按下两个卡扣即可拉出 battery。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
相关手册
Bosch Gsr18v 190b22 Repair Manual
查看详情
Bosch Gsr18v 190b22 Repair Manual Ba37d883
查看详情
Bosch Gks18v 25 Circular Saw Repair And Maintenance Manual Repair Manual
查看详情
Bosch Gdx18v 1800 Repair Manual
查看详情
Bosch Gba18v40 Core18v 4 Ah Advanced Power Battery Repair Manual
查看详情
Dewalt Dcw210 Random Orbit Sander Repair Maintenance Manual Db4daf64
查看详情
Dewalt Dcb115 Battery Charger Repair Manual
查看详情
Craftsman Cmcs500m1 Repair Manual
查看详情
Craftsman Cmcf800c1 Repair Manual
查看详情
Craftsman Cmcd700c1 Repair Manual
查看详情
Black Decker Lcs1020 Repair Manual Fb4bc7e8
查看详情
Black Decker Bdcr20c Repair Manual
查看详情