GKS18V-25, GKS18V-25N

型号： GKS18V-25, GKS18V-25N

亦称： Robert Bosch GmbH, GKS18V-25, GKS18V-25, GKS18V-25N

• Bosch Gks18v 25 Circular Saw Repair And Maintenance Manual Repair Manual

• The foot rocks on a flat surface, is bent or cracked, or moves despite locked adjustments.

  The foot rocks on a flat surface, is bent or cracked, or moves 1. Remove the battery and place the foot on a known-flat surface, inspecting from

• motor 和轴转动，但刀片在垫圈上卡滞或滑动，正常支撑切割时发生。

  motor和轴转动，但锯片在正常支撑切割时卡住或打滑。 1. 第一次打滑时松开扳机，等待锯片停止，拆下motor。

• 安装了正确的battery，但按下锁定按钮时触发器无motor响应。

  安装了正确的battery，但按下锁定按钮且 1. 将锁定按钮复位，取下battery，检查电池组和工具是否有热量、液体、裂纹或烧伤。

• No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.

  No-load operation is smooth, but the saw bounces, chatters, 1. Release the trigger, keep the foot flat until the blade stops, and remove the

• The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.

  The external structure is visibly cracked, loose, crushed, 1. Remove the battery and stop carrying or operating the saw until the complete

• The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.

  The blade turns steadily, but wood cuts slowly, burns, or 1. Stop forcing the saw, let the blade stop, remove the battery, and inspect teeth for

• With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.

  With the blade clear of material, the saw sounds slow, hunts, 1. Remove the battery, inspect the blade and guards, and hand-turn the blade to feel

• The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.

  The saw or pack smokes, leaks, sparks, melts, smells burned, 1. Stop, move away from the hazard, and remove the battery only if it can be done

• 底座可设定角度，但斜切杆锁定后仍移动或切割时漂移。

  底座可设定角度，但倾斜杆锁定后或切割时会移动。1. 停止切割，移除battery，标记选定倾斜角度。

• 360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。

  360度尘口卡住或松动，或兼容的 1. 移除battery，在无软管情况下测试空尘口的旋转范围

• 锁定0度斜切时，声音正常的刀片与底座不垂直。

  在锁定0度倾斜时，良好刀片与底座不垂直。1. 移除battery，确认已知直刀片正确安装且底座无损。

• A suitable bag or vacuum collects little dust while the port remains secure and aimed.

  A suitable bag or vacuum collects little dust while the port 1. Remove the battery, detach the bag or hose, and clear dry chips from the

• FM-08: FM-08 空载速度弱、不均匀或波动

  FM-08 空载速度弱、不均匀或波动

• FM-07: FM-07 触发器卡滞或释放后 MOTOR 继续运行

  触发器卡滞或释放后 motor 继续运行，原因是开关或触发机构故障。

• FM-01: FM-01 工具完全无电 - 无 MOTOR 反应

  工具完全无电，按下触发器时无 motor 反应，尽管已正确安装 battery。

• FM-37: FM-37 外壳、手柄、BATTERY导轨或通风口开裂或损坏

  FM-37 外壳、手柄、BATTERY导轨或通风口开裂或损坏

• fm-p17-b-2db8b3a0: 兼容的 battery 无法完全插入机壳或会卡住

  1. 取出 battery，检查整个导轨和锁扣路径后再安装

• fm-p29-b-beec475a: The selected depth will not remain fixed after the depth lever is

  1. Stop cutting, remove the battery, and mark the current depth position on the scale.

• FM-24: FM-24 下护罩无法及时关闭

  FM-29 斜切设置滑动或无法保持

• FM-38: FM-38 冒烟、烧焦气味、熔化、液体、火花或BATTERY损坏

  锯或 battery 出现冒烟、烧焦气味、熔化、液体泄漏、火花、膨胀、通风或其他严重损坏迹象。

• FM-06: FM-06 锁定装置不阻止触发器或未复位

  FM-06 锁定装置不阻止触发器或未复位

• FM-27: 深度设定后无法保持固定

  停止切割，取出 battery，标记当前深度位置 FM-27

• FM-04: battery 卡在锯内无法取出

  支撑 battery，按下释放按钮，仅向前滑动至次级位置

• FM-33: FM-33 尘口无法旋转、保持位置或固定软管

  FM-33 尘口无法旋转、保持位置或固定软管