FM-13 BATTERY 到达就位位置但无法锁定或会脱离

battery 完全插入，但一侧或两侧释放卡扣未能固定，或无需按下两个卡扣即可拉出 battery。

• A side release tab is dirty, cracked, worn, broken, or not returning
• The mating catch in the tool is worn or damaged
• The insertion stem or guide geometry misaligns the retaining tabs
• The housing is distorted even though insertion is possible
• The pack was not pushed fully to the normal seated stop

1. The fully seated pack is positively retained by both tabs and releases only when both normal tabs are pressed, or the bad side is isolated.

1.

这是完整维修手册中所含故障排除指南的预览。

• 已知良好兼容的 Bosch 12V 最大工具

• The pack inserts fully but one or both side release tabs do not retain it, or the pack can pull out without pressing both tabs.

  The pack inserts fully but one or both side release tabs do not retain it, or the pack can 1. Stop using an interface that cannot retain the battery and remove the pack so it cannot

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。