model
DCB115
DeWalt DCB115 是一款单端口锂离子battery充电器，适用于12V MAX、20V MAX和FLEXVOLT battery 电池组。其为北美市场设计，配备120 V交流输入和4 A单级充电输出。
报告的成功维修率 0%
型号详情
型号： DCB115
亦称： DeWalt, DeWalt Tools, DeWalt Power Tools, DCB115
症状
- The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
yet been confirmed. and the charger for cracked rails; use FM-17 or FM-18 if found.
- POWER CORD OR PLUG IS DAMAGED, LOOSE, SCORCHED, OR HOT
Stop using it and unplug by the plug only if the connection is safe to POWER CORD OR PLUG IS DAMAGED, LOOSE, Remove the battery, unplug the charger, and take it off the wall before correcting the mount.
- 充电器异常发热或潮湿，或有烧毁的端子
断开电源，让充电器和电池组自然冷却 充电器异常发热或潮湿，或端子烧毁 不要插入或充电损坏的电池组；仅在安全时移除。
- The red light keeps blinking while the yellow indicator stays on even after the battery and charger have naturally reached an allowed room-temperature environment.
The red light keeps blinking while the yellow indicator Remove the battery and let it reach normal room temperature naturally;
- Metal chips, grinding dust, steel wool, foil, or another dry conductive buildup is visible in the battery cavity, around contacts, or at ventilation slots. No liquid or active smoke, spark, burning, or melting is present.
Metal chips, grinding dust, steel wool, foil, or another dry 1. Unplug the charger and remove the battery before a conductive particle
- Liquid has entered the charger or battery interface, or the charger shows smoke, sparks, burning odor, charring, melting, or active electrical arcing.
Liquid has entered the charger or battery interface, or Warn other people away and disconnect power only from a safe
- 一个完全插入、物理完好的兼容battery无红或黄灯，而同一DCB115能为其他已验证良好的兼容电池组充电。
一个完全就位、物理完好的兼容battery不亮红灯或黄灯。请拔掉充电器并移除单个被拒绝的电池组；检查其是否有热损伤、裂纹、膨胀、泄漏、潮湿、烧毁端子或变形，如有，使用FM-17。
- The attached cord or plug is cut, frayed, crushed, loose, discolored, scorched, or abnormally hot. There is no current smoke, spark, flame, melting charger housing, or liquid ingress.
The attached cord or plug is cut, frayed, crushed, loose, 1. Stop using the charger and unplug it by the plug only if the connection is
- A battery intended for the charger has physical damage, swelling, leakage, wetness, burned or melted terminals, or a deformed case. It may or may not still fit the charger.
A battery intended for the charger has physical damage, 1. Do not insert or recharge the damaged pack; if it is already in the
- The charger has dry visible structural damage to its upper or lower housing, tabletop feet, battery rails, retention area, contact support, or rear wall-mount slots. No liquid, smoke, spark, burning, or melting is active.
The charger has dry visible structural damage to its Unplug the charger and remove the battery before handling or flexing
- Independent checks show the battery charges and powers a tool normally, but the red or yellow indicator is too dim to read, remains stuck, stays on after pack removal, or does not match the label pattern.
Independent checks show the battery charges and Unplug the charger, remove the pack, and clean only the outside of the
- The charger housing becomes much hotter than normal charging warmth or operation repeatedly pauses as the charger heats, but there is no smoke, spark, burning odor, liquid, melting, swollen pack, or visible structural damage.
The charger housing becomes much hotter than normal Disconnect power, remove the battery, and let both complete items cool
故障模式
- FM-17: BATTERY开裂、膨胀、泄漏、潮湿或端子烧毁
FM-17 BATTERY开裂、膨胀、泄漏、潮湿或端子烧毁
- FM-03: BATTERY卡在充电器中或无法释放
FM-03 BATTERY卡在充电器中或无法释放
- FM-05: 一个兼容电池组无指示灯，而其他电池组正常充电
FM-05 一个兼容电池组无指示灯，而其他电池组正常充电
- FM-15: 导电碎屑位于 BATTERY 插槽或通风口中
FM-15 导电碎屑进入BATTERY腔体或通风口
- FM-19: 墙壁安装充电器在插槽完好时移位或脱落
FM-19 墙壁安装充电器在插槽完好时移位或脱落
- FM-06: 电池组恢复至室温后仍存在冷热延迟
FM-06 电池组恢复至室温后仍存在冷热延迟
- FM-01: 插入电池组无指示灯或充电响应
FM-01 完全就位的电池组无指示灯或充电响应
- FM-02: BATTERY 无法完全滑入或插入充电器
FM-02 BATTERY无法完全滑入或就位于充电器中
- FM-16: 液体进入，或充电器冒烟、火花、燃烧或熔化
FM-16 液体进入，或充电器冒烟、火花、燃烧或熔化
- FM-13: 插入充电器时断路器或 GFCI 跳闸
FM-13 插入充电器时跳闸或触发GFCI
- FM-11: 指示灯在充电正常时暗淡、卡住或错误
FM-11 指示灯在充电正常时暗淡、卡住或错误
- FM-04: BATTERY就位但无法在充电器中保持固定
FM-04 BATTERY就位但无法在充电器中保持固定
相关故障排除
Common symptoms
- The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
- POWER CORD OR PLUG IS DAMAGED, LOOSE, SCORCHED, OR HOT
- 充电器异常发热或潮湿，或有烧毁的端子
- The red light keeps blinking while the yellow indicator stays on even after the battery and charger have naturally reached an allowed room-temperature environment.
- Metal chips, grinding dust, steel wool, foil, or another dry conductive buildup is visible in the battery cavity, around contacts, or at ventilation slots. No liquid or active smoke, spark, burning, or melting is present.
- Liquid has entered the charger or battery interface, or the charger shows smoke, sparks, burning odor, charring, melting, or active electrical arcing.
- 一个完全插入、物理完好的兼容battery无红或黄灯，而同一DCB115能为其他已验证良好的兼容电池组充电。
- The attached cord or plug is cut, frayed, crushed, loose, discolored, scorched, or abnormally hot. There is no current smoke, spark, flame, melting charger housing, or liquid ingress.
- A battery intended for the charger has physical damage, swelling, leakage, wetness, burned or melted terminals, or a deformed case. It may or may not still fit the charger.
- The charger has dry visible structural damage to its upper or lower housing, tabletop feet, battery rails, retention area, contact support, or rear wall-mount slots. No liquid, smoke, spark, burning, or melting is active.