FM-02: FM-02 工具启动后，BATTERY输出在普通负载下突然中断

FM-02 工具启动后，BATTERY输出在普通负载下突然中断

• The application is binding, stalled, overloaded, or using a damaged bit or attachment
• The pack is near empty, overheated, overcooled, or in protection
• Dirty or resistive contacts heat or interrupt current
• The sealed cell, conductor, temperature, or protection path is weak
• The tool has abnormal drag or its own electronic fault

1. The corrected tool runs continuously under ordinary load, or the abrupt-cutoff source is isolated to the pack, tool, or work without repeated stalling.

1.

这是完整维修手册中所含故障排除指南的预览。

• A compatible tool starts normally, then loses all battery output suddenly during an ordinary task while the trigger remains commanded.

  A compatible tool starts normally, then loses all battery output suddenly during an 1. Release the tool trigger immediately, wait for all motion to stop, remove the battery, and

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。