model
BAT414
GSR12V-140FCB22 套装包含 Bosch BAT414 12V 最大锂离子 2.0 Ah 圆柱形 battery 电池组,适用于 Bosch 12V 最大无绳电动工具。配备密封外壳、插入柄和侧释放卡扣,确保工具稳固连接。
报告的成功维修率 0%
型号详情
型号: BAT414
亦称: Robert Bosch GmbH, Bosch Power Tools, GSR12V-140FCB22 Kit Battery (BAT414), BAT414
症状
- battery 提供正常初始功率,但在相同普通任务中比同类健康的 2.0 Ah Bosch 12V Max 电池组更快耗尽。
battery提供正常的初始功率,但在相同普通任务中比同类健康的2.0 Ah Bosch {MEASUREMENT:0} Max电池组更快耗尽。 1. 在正常室温下使用指定充电器为可疑电池组充满电,并确认充电器达到其定义的满电状态。
- 外观完好且完全插入的 BAT414 电池组在兼容 Bosch 12V Max 工具中无可用输出。
一个外观完好、完全插入的BAT414电池组在兼容的Bosch {MEASUREMENT:0} Max工具中不产生可用输出。 1. 从工具中取出battery,检查外壳、插入杆、释放标签、隔板和接触点是否有异常发热、膨胀、裂纹、泄漏、潮湿、烧焦或其他停止使用的损坏。
- The battery is actively smoking, hissing, venting gas, sparking, burning, melting, leaking, or rapidly escalating in temperature.
The battery is actively smoking, hissing, venting gas, sparking, burning, melting, leaking, 1. Move away immediately, keep other people and pets away, and do not touch, carry,
- 充电开始或停止时 battery 被移动或握持
移动、抬起或保持在一个位置。 FM-07
- 充满电的电池组在短暂冷却干燥存放后变得无法使用,即使未放入工具或充电器。
完全充电的电池组在短暂的冷却干燥存储后变得无法使用,即使未放入工具或充电器。 1. 在指定充电器上为电池组充满电,取出充电器和工具,记录日期和起始状态。
- The charger indication or charge cycle changes when the seated battery is touched, shifted, lifted, or held in one position.
The charger indication or charge cycle changes when the seated battery is touched, 1. Stop wiggling the battery, unplug the charger, and remove the pack so arcing or
- The pack is fully or partly engaged but cannot be removed by operating the normal release and pulling straight.
The pack is fully or partly engaged but cannot be removed by operating the normal 1. Turn the tool off or unplug the charger, secure the assembly on a stable surface, and
- A compatible tool starts normally, then loses all battery output suddenly during an ordinary task while the trigger remains commanded.
A compatible tool starts normally, then loses all battery output suddenly during an 1. Release the tool trigger immediately, wait for all motion to stop, remove the battery, and
- The stable pack is cracked, crushed, punctured, burned, deformed, swollen, corroded, or has damaged contacts, barriers, insertion stem, or release tabs.
The stable pack is cracked, crushed, punctured, burned, deformed, swollen, corroded, or 1. Remove the battery from every tool and charger only if safe, keep metal away from the
- 圆柱形电池组在兼容 Bosch 12V Max 工具或认证充电器中,未达到正常就位位置或需异常用力。
圆柱形电池组在正常就位前停止,或插入时需要异常用力。 1. 确认 battery 上印有 BAT414,配套产品为 Bosch 10.8V/12V
- The pack inserts fully but one or both side release tabs do not retain it, or the pack can pull out without pressing both tabs.
The pack inserts fully but one or both side release tabs do not retain it, or the pack can 1. Stop using an interface that cannot retain the battery and remove the pack so it cannot
- The tool continues to run but power is continuously low, uneven, or surging instead of stopping completely.
The tool continues to run but power is continuously low, uneven, or surging instead of 1. Stop the tool, remove the battery, and inspect the pack for heat, swelling, damage,
故障模式
- FM-05: FM-05 BATTERY 在存储和断开连接时快速失电
battery 在存储和断开连接时快速失电,短暂冷却干燥存放后变得无法使用。
- FM-06 BATTERY 正确就位且温度正常后无法开始或完成充电
FM-06 BATTERY 正确就位且温度正常后无法开始或完成充电
- FM-03: FM-03 工具功率弱、波动或下降,但无完全断电
FM-03 工具功率弱、波动或下降,但无完全断电
- FM-14: FM-14 BATTERY 卡住,无法从工具或充电器中释放
battery 完全或部分插入,但无法通过正常释放操作和直接拉出将其取出。
- FM-02: FM-02 工具启动后,BATTERY输出在普通负载下突然中断
FM-02 工具启动后,BATTERY输出在普通负载下突然中断
- FM-04: FM-04 充满电后运行时间明显短于正常水平
FM-04 充满电后运行时间明显短于正常水平
- FM-13 BATTERY 到达就位位置但无法锁定或会脱离
battery 完全插入,但一侧或两侧释放卡扣未能固定,或无需按下两个卡扣即可拉出 battery。
- FM-09: FM-09 主动 BATTERY 危险 - 冒烟、嘶嘶声、通风、火花、火焰、熔化或泄漏
battery 活动危险,伴有烟雾、嘶嘶声、排气、火花、火焰、熔化或泄漏,表明热失控或严重损坏。
- FM-12 BATTERY 无法完全插入兼容工具或充电器
FM-12 BATTERY 无法完全插入兼容工具或充电器
- FM-11: FM-11 BATTERY 曾浸水、浸没或暴露于导电或腐蚀性液体
battery 暴露于水或导电/腐蚀性液体,导致损坏或不安全状况。
- FM-10: FM-10 外壳、插入杆、释放卡扣、端子、隔板或电池组本体损坏或膨胀
FM-10 外壳、插入杆、释放卡扣、端子、隔板或电池组本体损坏或膨胀
- FM-01: FM-01 套装 BATTERY 无法为已知良好兼容 Bosch 12V Max 工具供电
完全插入且外观正常的 BAT414 battery 在兼容 Bosch 12V Max 工具中无可用输出。
相关故障排除
Common symptoms
- battery 提供正常初始功率,但在相同普通任务中比同类健康的 2.0 Ah Bosch 12V Max 电池组更快耗尽。
- 外观完好且完全插入的 BAT414 电池组在兼容 Bosch 12V Max 工具中无可用输出。
- The battery is actively smoking, hissing, venting gas, sparking, burning, melting, leaking, or rapidly escalating in temperature.
- 充电开始或停止时 battery 被移动或握持
- 充满电的电池组在短暂冷却干燥存放后变得无法使用,即使未放入工具或充电器。
- The charger indication or charge cycle changes when the seated battery is touched, shifted, lifted, or held in one position.
- The pack is fully or partly engaged but cannot be removed by operating the normal release and pulling straight.
- A compatible tool starts normally, then loses all battery output suddenly during an ordinary task while the trigger remains commanded.
- The stable pack is cracked, crushed, punctured, burned, deformed, swollen, corroded, or has damaged contacts, barriers, insertion stem, or release tabs.
- 圆柱形电池组在兼容 Bosch 12V Max 工具或认证充电器中,未达到正常就位位置或需异常用力。