BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - 維修同保養手冊 維修手冊
全面嘅 Bosch BAT414 12V Max 鋰離子 battery 電池組維修同保養指引，包括故障排除、安全同更換指導。
$39.99
最后更新 Aug 7, 2026, 6:10 AM
Manual information
关于本手册
全面嘅 Bosch BAT414 12V Max 鋰離子 battery 電池組維修同保養指引，包括故障排除、安全同更換指導。
报告的成功维修率 0%
Price
$39.99
完整手册包含
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
目录预览
- Bosch Gsr12v-140fcb22 套裝 Battery (bat414) - 維修同保養手冊
- 最重要嘅六件事
- 呢個型號實際擁有嘅功能
- 指示燈同信號圖
- 型號修訂警告
- 充電同電力路徑
- 正常使用流程
- 正常行為可能似故障
- 呢個型號冇嘅功能
- FM-10 外殼、插入柄、釋放掣、端子、屏障或電池組本體受損或膨脹
- 普通負載
- FM-11 BATTERY 曾經濕水、浸水或暴露喺導電或腐蝕性液體中
- FM-08 BATTERY 無煙、無火花嘅情況下變得異常熱，
- FM-15
- FM-06 至 FM-11、FM-15。
This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.
可能根本原因
- The pack is discharged, too hot or cold, or in a protection state
- Terminal faces are dirty, wet, damaged, or not aligned
- The insertion stem stops before the electrical seat even though the pack looks inserted
- The sealed cell, conductor, terminal, or protection path has failed
- The comparison tool, rather than the battery, has failed
- The application is binding, stalled, overloaded, or using a damaged bit or attachment
- The pack is near empty, overheated, overcooled, or in protection
- Dirty or resistive contacts heat or interrupt current
- The sealed cell, conductor, temperature, or protection path is weak
- The tool has abnormal drag or its own electronic fault
- The battery is not fully charged or is at an extreme temperature
- Contact resistance from dirt, wear, or damage limits current
- The bit, attachment, fastener, or work interface is binding, dull, damaged, or overloaded
- The sealed cells or internal links have lost power capability
- The tool motor or controller is weak
- The pack has aged or lost usable cell capacity
- The full indication came from a charger or contact problem
- Cold, heat, a heavy drill/driver task, or tool drag raised energy demand
- Dirty contacts created loss and heat
- The comparison task or tool condition was not equivalent
- The sealed cells have high self-discharge or an internal leakage path
- The pack was not actually full before storage
- Storage was hot, wet, conductive, or near metal
- The battery was left in a tool that drew standby current
- The comparison interval or starting state was not controlled
- The insertion stem, guide surfaces, or seating stops are worn, dirty, or distorted
- Battery contacts are recessed, contaminated, loose, or damaged
- The charger contact carrier or slot is damaged
- The release tabs or seating geometry do not hold the electrical interface
- An internal battery terminal link is movement-sensitive
- The tool or work is stalled, overloaded, or binding
- Charging or use occurred in a hot environment with poor ventilation
- Dirty or resistive contacts are generating heat
- The pack has an internal cell, conductor, or protection defect
- The charger or tool is driving an abnormal condition
- Internal cell short, thermal runaway, or conductor failure
- Severe impact, puncture, crushing, fire, or excessive heat exposure
- Liquid or conductive contamination caused a short
- Improper charger, adapter, direct terminal connection, or modification
- A damaged pack was charged or used
- Drop, impact, crushing, puncture, or tool/charger ejection
- Heat, age, internal gas generation, or cell swelling
- Forced insertion, prying, adapters, or release-tab abuse
- Conductive/corrosive contamination damaged contacts or barriers
- A prior repair or modification compromised the sealed housing
- Rain, hose, puddle, submersion, or wet storage
- Salt, pool, bleach, cleaner, or chemical exposure
- Liquid entered through the terminal area or housing seam
- The pack was placed in a wet charger or tool
- A user attempted washing or liquid cleaning
- One or both release tabs or a mating catch are jammed, broken, or loaded sideways
- Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
- The pack was forced, twisted, or inserted with an adapter
- The tool or charger housing is damaged
- The interface is still energized or the tool is under mechanical load
- Battery contacts are worn, recessed, contaminated, loose, or damaged
- The insertion stem or release tabs permit electrical movement even though retention feels secure
- The internal terminal link is movement-sensitive
- The tool contact carrier or wiring is damaged
- Hand pressure is masking an unsafe interface fault
- The outlet or charger has no power or is faulty
- The pack is outside the allowed charging temperature range
- Contacts or guides are dirty, wet, damaged, or not fully seated
- The charger is not designated for the battery platform
- The sealed cell, temperature, conductor, terminal, or protection path has failed
- Wrong battery platform, identity mismatch, or an adapter is being attempted
- Debris obstructs the insertion stem, guide surfaces, tool cavity, or charger socket
- The stem, guide rib, seating stop, housing, or mating cavity is distorted
- Contacts or insulating barriers are bent or displaced
- The tool or charger interface, rather than the battery, is damaged
- A side release tab is dirty, cracked, worn, broken, or not returning
- The mating catch in the tool is worn or damaged
- The insertion stem or guide geometry misaligns the retaining tabs
- The housing is distorted even though insertion is possible
- The pack was not pushed fully to the normal seated stop
支持的型号
相关型号
常见症状
一個充滿電嘅電池組喺短時間冷卻乾燥儲存後變得無法使用，即使佢冇放喺工具或充電器入面。
查看详情
電池組浸水、內部濺水、留喺雨中，或者暴露喺鹽水、漂白水、氯或其他導電/腐蝕性液體。
查看详情
當 battery 移動或者攞住嘅時候，充電會開始或者停止
查看详情
當牢固卡住嘅 battery 移動時，工具輸出會斷斷續續。
查看详情
電池組喺充電、儲存或普通使用時迅速或痛苦地發熱，但冇主動排氣、火焰、洩漏或明顯膨脹。
查看详情
圓筒形電池組喺兼容 Bosch 12V Max 工具或認可充電器中，喺正常就位前停止或需要異常力量。
查看详情
安全外觀嘅 battery 冇進入正常充電週期，或者正確就位後永遠達唔到充電器定義嘅滿電指示。
查看详情
一個外觀正常、完全插入嘅 BAT414 電池組喺兼容 Bosch 12V Max 工具中冇產生可用輸出。
查看详情
電池組完全插入，但一個或兩個側面釋放扣無法固定，或者唔按兩個扣都可以拉出電池組。
查看详情
當觸摸、移動、抬起或保持喺一個位置時，充電器指示或充電週期會改變。
查看详情
兼容工具正常啟動，然後喺普通任務中突然失去所有 battery 輸出，扳機仍然保持按下。
查看详情
電池組完全或部分插入，但無法透過正常釋放操作同直拉方式取出。
查看详情
工具繼續運行，但電力持續低、不均勻或波動，而唔係完全停止。
查看详情
完全就位同固定嘅電池組只喺某啲位置供電，或者當工具或 battery 移動時中斷，無正常過載停止。
查看详情
battery 正喺冒煙、嘶嘶聲、排氣、火花、燃燒、熔化、洩漏或溫度迅速升高。
查看详情
battery 提供正常初始電力，但喺同類健康嘅 2.0 Ah Bosch 12V Max 電池組中，喺相同普通任務中更快耗盡。
查看详情
穩定嘅電池組有裂紋、壓碎、穿孔、燒焦、變形、膨脹、腐蝕，或者接觸點、隔板、插入柄或釋放扣損壞。
查看详情
故障模式
摘要
完全插入、外觀正常嘅 BAT414 battery 喺兼容 Bosch 12V Max 工具中冇產生可用輸出。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 喺儲存同斷開連接時快速失去電量，喺短時間冷卻乾燥儲存後變得無法使用。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
當battery移動或者保持喺某啲位置時，充電會間歇性開始或停止，因為接觸唔穩定或者有電弧。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery喺充電、存放或者工具使用期間迅速異常發熱，但冇冒煙、火花、滲漏或者腫脹。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 活躍危險，伴隨煙霧、嘶嘶聲、排氣、火花、火焰、熔化或洩漏，顯示熱失控或嚴重損壞。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 暴露喺水或導電/腐蝕性液體，造成損壞或不安全狀況。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 完全或部分插入，但無法透過正常釋放操作同直拉方式取出。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
工具啟動，但喺普通負載下，battery輸出突然中斷，導致突然失去動力。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
摘要
battery 完全插入，但一個或兩個側面釋放扣無法固定，或者唔按兩個扣都可以拉出 battery。
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
相关手册
Bosch Gsr18v 190b22 Repair Manual
查看详情
Bosch Gsr18v 190b22 Repair Manual Ba37d883
查看详情
Bosch Gks18v 25 Circular Saw Repair And Maintenance Manual Repair Manual
查看详情
Bosch Gdx18v 1800 Repair Manual
查看详情
Bosch Gba18v40 Core18v 4 Ah Advanced Power Battery Repair Manual
查看详情
Dewalt Dcw210 Random Orbit Sander Repair Maintenance Manual Db4daf64
查看详情
Dewalt Dcb115 Battery Charger Repair Manual
查看详情
Craftsman Cmcs500m1 Repair Manual
查看详情
Craftsman Cmcf800c1 Repair Manual
查看详情
Craftsman Cmcd700c1 Repair Manual
查看详情
Black Decker Lcs1020 Repair Manual Fb4bc7e8
查看详情
Black Decker Bdcr20c Repair Manual
查看详情