Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The saw, battery, or charger becomes abnormally hot or repeatedly shuts down after warming.
The robot powers down before the job is complete and gives no repeatable beep count.
The same rooms now exhaust a full charge far earlier than the owner baseline.
The charger light remains dark with the charger connected to a known live outlet.
The robot repeatedly reverses, circles, or turns away on a clear, level hard floor after placement causes are ruled out.
The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.
The battery will not insert fully, click into place, remain retained, or release normally.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The cool saw starts, then stops during a brief no-load test or light cut before heat builds.
The pad no longer lies flat and interferes with smooth travel.
The robot charges fully, but ends early with low battery, repeatedly recharges, or cannot reach the Home Base before Error 46.
The blade leaves the line, flexes excessively, bends, or breaks during an otherwise controlled cut.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The lock-off or trigger sticks, will not move fully, starts unpredictably, or will not stop reliably.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.
The robot stops or will not proceed and reports one beep after the two-tone distress sound.
The robot will not start, or stops after a pad falls off, and reports three beeps.
The shoe will not pivot freely, is bent or loose, or will not sit firmly against the work.
The blade strokes steadily but cuts slowly, stalls easily, or needs excessive feed force.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.

Failure Modes

part