Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The robot stops or will not proceed and reports one beep after the two-tone distress sound.
The robot will not start, or stops after a pad falls off, and reports three beeps.
The robot stops and reports eight beeps because its wheels cannot turn.
The robot stops and reports five beeps while wedged or unable to escape.
The robot stops with a drive wheel hanging over a step or threshold and reports six beeps.
The pad card stops short, binds, or will not remain seated in both underside rails.
The robot reports four beeps immediately after an attempted start.
The top lid stands proud, will not latch, or the robot reports Error 45 when a job starts.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The robot is charged but cannot drive off the Home Base when a job begins after clearance and placement are proven.
The robot wakes but the battery level does not rise on the Home Base, or the app announces a charging error.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.
The Clean Base has no status response or cannot pass charge to the robot.
The pad no longer lies flat and interferes with smooth travel.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The Clean Base does not evacuate the bin after self-dock or app command.
The robot cannot sense or drive the left wheel, announces Error 7, pulls right, or stops at startup.
The robot cannot sense or drive the right wheel, announces Error 10, pulls left, or stops at startup.
One wheel sticks, slips, circles, or pulls the robot off a straight line.

Failure Modes

part