Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
The dual rubber brushes jam, show damage, or leave a central strip uncleaned.
The corner brush stops, loosens, wobbles, or leaves edge debris behind.
The robot refuses charge because the pack temperature is outside normal range.
The Clean Base has no status response or cannot pass charge to the robot.
The Clean Base reports a clog, leaks air, or releases dust from the path.
The Clean Base still reports a bag condition after the owner checks the bag.
The robot approaches an actual stair, ledge, landing, balcony, or raised edge.
The robot is trapped, tilted, moved, or unable to continue a clear path.
The same rooms now exhaust a full charge far earlier than the owner baseline.
The robot halts on a safe flat floor as though a drop were present.
The pack will not charge, or the charger light stays off or shows an abnormal red pattern.
The charged robot can show some activity, but CLEAN presses, indicators, or tones are missing, delayed, or inconsistent.
The blade leaves the line, flexes excessively, bends, or breaks during an otherwise controlled cut.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The chuck sleeve will not turn enough to move the jaws or admit a normal straight bit.
The cool drill begins to run, then stops during a brief no-load test or light work.
CLEAN stays dark after the robot has rested on a powered Clean Base.
A cleaning run begins, then the robot cannot back away from the base.
Home is requested, yet the robot misses the Clean Base or will not settle.
One wheel sticks, slips, circles, or pulls the robot off a straight line.
FM-17: THE DUAL MULTI-SURFACE BRUSHES ARE JAMMED OR DAMAGED
FM-32: THE CLEAN BUTTON, LIGHTS, OR TONES RESPOND ABNORMALLY
FM-02: THE ROBOT WILL NOT CHARGE OR SHOWS A CHARGING ERROR
FM-17: THE ROBOT CROSSES A REAL DROP OR FAILS TO STOP AT STAIRS
FM-28: THE PAD DRAGS, BUNCHES, SEPARATES, OR RUBS A WHEEL
FM-19: THE CORNER BRUSH IS STUCK, LOOSE, OR DOES NOT ROTATE
FM-04: CHARGING IS BLOCKED BECAUSE THE BATTERY IS TOO WARM OR TOO COLD
FM-09: THE ROBOT CANNOT LEAVE THE CLEAN BASE
FM-02: THE CLEAN BASE HAS NO AC POWER OR WILL NOT CHARGE THE ROBOT
FM-12: THE FRONT BUMPER STAYS PRESSED OR REPEATED COLLISIONS CONTINUE
FM-24: THE ROBOT MAKES AN ABNORMAL RATTLE, GRIND, SQUEAL, OR VIBRATION
FM-16: WALL-FOLLOWING OR EDGE NAVIGATION IS CONSISTENTLY WRONG
FM-15: FM-15 TOOL, BATTERY, OR CHARGER OVERHEATS
FM-18: THE BRUSH-FRAME DOOR WILL NOT CLOSE OR LATCH SECURELY
FM-21: THE BIN OR FILTER WILL NOT SEAT, LATCH, OR BE DETECTED
FM-22: THE FULL BIN INDICATION REMAINS AFTER EMPTYING
FM-15: THE REAR CASTER DRAGS, SQUEAKS, WOBBLES, OR WILL NOT SWIVEL FREELY
FM-11: DRIVE-WHEEL MOVEMENT IS JAMMED, CIRCULAR, OR PULLS TO ONE SIDE
FM-27: THE CLEAN BASE REPORTS A CLOG OR LEAK IN THE EVACUATION PATH
FM-05: THE BATTERY IS NOT DETECTED, NOT COMMUNICATING, OR A BATTERY FAULT REMAINS