Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The battery will not insert fully, click into place, remain retained, or release normally.
The battery will not slide fully into the handle, stay retained, or release normally.
The clamp lever opens normally, but the installed blade remains trapped in the front clamp.
The bin will not seat flush, the filter will not stay placed, or detection fails.
The chuck sleeve will not turn enough to move the jaws or admit a normal straight bit.
The pack will not charge, or the charger light stays off or shows an abnormal red pattern.
The robot will not start, or stops after a pad falls off, and reports three beeps.
The drill runs steadily but drills slowly or cannot drive a normal fastener with correct setup.
The brush-frame door sits proud, springs open, or will not latch securely.
The robot wakes but the battery level does not rise on the Home Base, or the app announces a charging error.
The robot is charged but cannot drive off the Home Base when a job begins after clearance and placement are proven.
The Clean Base does not evacuate the bin after self-dock or app command.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The charger will not begin or complete charging, or its green light does not behave normally.
The tool-free blade-clamp release lever will not reach full open or close securely.
The shoe will not pivot freely, is bent or loose, or will not sit firmly against the work.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The robot charges fully, but ends early with low battery, repeatedly recharges, or cannot reach the Home Base before Error 46.
The Clean Base has no status response or cannot pass charge to the robot.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.

Failure Modes

part