Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The robot charges fully, but ends early with low battery, repeatedly recharges, or cannot reach the Home Base before Error 46.
The robot is charged but cannot drive off the Home Base when a job begins after clearance and placement are proven.
The tank is filled to the top and installed flat, but the red sweep or Error 37 still says to fill it.
The job ends with a docking problem or the robot cannot find the Home Base after placement, clearance, and map-start checks are corrected.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.
The robot wakes but the battery level does not rise on the Home Base, or the app announces a charging error.
The robot cannot sense or drive the left wheel, announces Error 7, pulls right, or stops at startup.
The robot cannot sense or drive the right wheel, announces Error 10, pulls left, or stops at startup.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The app reports Error 21, 25, 34, 38, 39, 47, 66, or 76 and the robot cannot reliably continue.
The robot stops and reports eight beeps because its wheels cannot turn.
The robot repeatedly reverses, circles, or turns away on a clear, level hard floor after placement causes are ruled out.
The app can move the robot, but the top buttons do nothing locally.
The robot stops and reports five beeps while wedged or unable to escape.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The robot powers down before the job is complete and gives no repeatable beep count.
The robot is trapped, tilted, moved, or unable to continue a clear path.
The pad no longer lies flat and interferes with smooth travel.
The robot will not start, or stops after a pad falls off, and reports three beeps.

Failure Modes

part