Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

Pulling the eject control under the handle does not drop or free the installed pad.
The pass count or spray behavior does not match the installed wet, damp, or dry pad.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The pad card stops short, binds, or will not remain seated in both underside rails.
The pack will not click into the rear bay or springs loose during handling.
The robot repeatedly reverses, circles, turns in place, or drifts instead of following a stable path.
The robot will not start, or stops after a pad falls off, and reports three beeps.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The robot wakes but the battery level does not rise on the Home Base, or the app announces a charging error.
The pad no longer lies flat and interferes with smooth travel.
The charger indicates charging but does not reach solid green in the expected charging period.
The jet pulses irregularly, sprays off-pattern, or carries visible contaminated water.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.
The robot reports four beeps immediately after an attempted start.
The app can move the robot, but the top buttons do nothing locally.
The clamp lever opens normally, but the installed blade remains trapped in the front clamp.
The robot is charged but cannot drive off the Home Base when a job begins after clearance and placement are proven.
The tank is filled to the top and installed flat, but the red sweep or Error 37 still says to fill it.
The job ends with a docking problem or the robot cannot find the Home Base after placement, clearance, and map-start checks are corrected.

Failure Modes

part