Reparatiegidsen zoeken

Vind reparatiegidsen, handleidingen, symptomen en foutcodes in de kennisbank.

Modellen

Handleidingen

Symptomen

The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
Een rechte bit blijft geklemd maar draait excentrisch, of de boorkop heeft zichtbare speling.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
NO WORKLIGHT OR MOTOR RESPONSE
DE BATTERY OF LADER START OF VOLTOOIT DE OPLADING NIET
DE BATTERY ZIT NIET GOED, VERGRENDELT, KOMT NIET LOS OF BLIJFT NIET VEILIG
Geen LED of motor reactie
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
Vooruit of achteruit schakelt niet, of de middenstand vergrendelt de trekker niet.
Met de battery verwijderd en zonder boor zal de boorkop niet normaal met de hand draaien of voelt vast.

Storingsmodi

part