failure mode
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The worklight turns on when the trigger is pressed, but the motor does not start and the chuck does not rotate.
Diagnostisch overzicht
The worklight turns on when the trigger is pressed, but the motor does not start and the chuck does not rotate.
Waarschijnlijke grondoorzaken
- Direction button is not fully engaged
- Tool or pack remains in heat protection
- Chuck or internal drive is mechanically jammed
- Trigger output, brushes, motor, or wiring has failed
Snelle controles
- Trigger use starts the motor and chuck whenever the worklight responds.
Reparatievoorvertoning
1.
Dit is een voorvertoning van de probleemoplossingsgids in de volledige reparatiehandleiding.
Gerelateerde symptomen
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
The trigger lights the work area, but the motor stays 1. Release trigger, remove the pack and bit, and let tool and pack cool.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT FM-09 POWER CUTS OUT WHEN THE PACK OR TOOL IS
Inbegrepen in de volledige handleiding
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Openbare pagina's tonen alleen een voorvertoning. Koop de volledige handleiding om complete reparatiestappen, diagrammen en verificatieprocedures te downloaden.