failure mode
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
Diagnostisch overzicht
FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
Waarschijnlijke grondoorzaken
- Gear or motor pinion connection has failed
- Impact hammer or anvil is broken or disconnected
- Internal bearing or drive part is jammed
- Severe wear has stripped the transmission path
Snelle controles
- Motor rotation is transmitted to a stable rotating anvil, or the tool is removed for service.
Reparatievoorvertoning
1.
Dit is een voorvertoning van de probleemoplossingsgids in de volledige reparatiehandleiding.
Gerelateerde symptomen
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor can be heard, but the front output remains 1. Release the trigger, remove the battery, and remove the bit if it can be done
Inbegrepen in de volledige handleiding
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Openbare pagina's tonen alleen een voorvertoning. Koop de volledige handleiding om complete reparatiestappen, diagrammen en verificatieprocedures te downloaden.