failure mode
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
Diagnostisch overzicht
FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
Waarschijnlijke grondoorzaken
- First bit is bent or has a damaged shank
- Bit is not fully seated in the chuck
- Debris holds the shank off center
- Anvil, chuck sleeve, or front support is worn or bent
Snelle controles
- A known-straight bit rotates on center without visible runout.
Reparatievoorvertoning
1.
Dit is een voorvertoning van de probleemoplossingsgids in de volledige reparatiehandleiding.
Gerelateerde symptomen
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
A straight bit traces a visible circle at no load instead of 1. Remove the pack, clean the chuck bore, and inspect the first bit for bend or
Inbegrepen in de volledige handleiding
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Openbare pagina's tonen alleen een voorvertoning. Koop de volledige handleiding om complete reparatiestappen, diagrammen en verificatieprocedures te downloaden.