Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.
The shoe will not pivot freely, is bent or loose, or will not sit firmly against the work.
The same rooms now exhaust a full charge far earlier than the owner baseline.
The cool drill begins to run, then stops during a brief no-load test or light work.
The saw, battery, or charger becomes abnormally hot or repeatedly shuts down after warming.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
With a secure known-good blade clear of the work, the saw has harsh sound, bind, or vibration.
Charging starts only after repositioning or drops out before completion.
The app can move the robot, but the top buttons do nothing locally.
A cleaning run begins, then the robot cannot back away from the base.
A battery message remains after a pack is installed and the cover is closed.
A full-bin indication remains after the bin has been emptied and reinstalled.
A remaining rattle, grind, squeal, or vibration persists after adjacent parts clear.
CLEAN stays dark after the robot has rested on a powered Clean Base.
Home is requested, yet the robot misses the Clean Base or will not settle.
The bin will not seat flush, the filter will not stay placed, or detection fails.
The brush-frame door sits proud, springs open, or will not latch securely.
The bumper remains pressed or collisions repeat after ordinary floor clearing.
The Clean Base does not evacuate the bin after self-dock or app command.
The Clean Base has no status response or cannot pass charge to the robot.
FM-12: SAW JUMPS, CHATTERS, OR KICKS IN THE CUT
FM-15: THE ROBOT BACKS UP, TURNS, SPINS, OR WILL NOT TRACK STRAIGHT
FM-28: THE PAD DRAGS, BUNCHES, SEPARATES, OR RUBS A WHEEL
FM-14: NO-LOAD STROKE GRINDS, KNOCKS, BINDS, OR VIBRATES
FM-07: THE TOP BUTTONS DO NOT RESPOND WHILE APPLICATION CONTROL STILL WORKS
FM-11: DRIVE-WHEEL MOVEMENT IS JAMMED, CIRCULAR, OR PULLS TO ONE SIDE
FM-17: THE DUAL MULTI-SURFACE BRUSHES ARE JAMMED OR DAMAGED
FM-18: THE BRUSH-FRAME DOOR WILL NOT CLOSE OR LATCH SECURELY
FM-19: THE CORNER BRUSH IS STUCK, LOOSE, OR DOES NOT ROTATE
FM-21: THE BIN OR FILTER WILL NOT SEAT, LATCH, OR BE DETECTED
FM-22: THE FULL BIN INDICATION REMAINS AFTER EMPTYING
FM-27: THE CLEAN BASE REPORTS A CLOG OR LEAK IN THE EVACUATION PATH
FM-05: THE BATTERY IS NOT DETECTED, NOT COMMUNICATING, OR A BATTERY FAULT REMAINS
FM-06: RUNTIME IS MUCH SHORTER THAN THE ESTABLISHED BASELINE
FM-15: THE REAR CASTER DRAGS, SQUEAKS, WOBBLES, OR WILL NOT SWIVEL FREELY
FM-25: THE CLEAN BASE WILL NOT EMPTY THE BIN AUTOMATICALLY OR MANUALLY
FM-26: THE CLEAN BASE REPORTS A FULL OR MISSING BAG AFTER THE BAG IS CHECKED
FM-20: PICKUP OR AIRFLOW IS WEAK, STALLED, OR A VACUUM PROBLEM PERSISTS
FM-01: THE ROBOT WILL NOT POWER ON OR WAKE
FM-02: THE CLEAN BASE HAS NO AC POWER OR WILL NOT CHARGE THE ROBOT