Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The robot stops with Error 68 because its camera failed during the cleaning job.
The robot is trapped, tilted, moved, or unable to continue a clear path.
The top lid stands proud, will not latch, or the robot reports Error 45 when a job starts.
The robot halts on a safe flat floor as though a drop were present.
The app can move the robot, but the top buttons do nothing locally.
The corner brush stops, loosens, wobbles, or leaves edge debris behind.
The same rooms now exhaust a full charge far earlier than the owner baseline.
The job ends with a docking problem or the robot cannot find the Home Base after placement, clearance, and map-start checks are corrected.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The robot refuses charge because the pack temperature is outside normal range.
The robot cannot sense or drive the left wheel, announces Error 7, pulls right, or stops at startup.
The robot cannot sense or drive the right wheel, announces Error 10, pulls left, or stops at startup.
The robot charges fully, but ends early with low battery, repeatedly recharges, or cannot reach the Home Base before Error 46.
The robot stops with a drive wheel hanging over a step or threshold and reports six beeps.
The tank is filled to the top and installed flat, but the red sweep or Error 37 still says to fill it.
The Clean Base reports a clog, leaks air, or releases dust from the path.
The Clean Base still reports a bag condition after the owner checks the bag.
The Clean Base has no status response or cannot pass charge to the robot.
The robot approaches an actual stair, ledge, landing, balcony, or raised edge.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.

Failure Modes

part