Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The robot stops and reports five beeps while wedged or unable to escape.
The robot stops with a drive wheel hanging over a step or threshold and reports six beeps.
The robot will not start, or stops after a pad falls off, and reports three beeps.
The robot stops or will not proceed and reports one beep after the two-tone distress sound.
The robot reports four beeps immediately after an attempted start.
The robot halts on a safe flat floor as though a drop were present.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The robot approaches an actual stair, ledge, landing, balcony, or raised edge.
The app reports Error 21, 25, 34, 38, 39, 47, 66, or 76 and the robot cannot reliably continue.
The pad no longer lies flat and interferes with smooth travel.
The robot powers down before the job is complete and gives no repeatable beep count.
The robot cannot sense or drive the left wheel, announces Error 7, pulls right, or stops at startup.
The robot cannot sense or drive the right wheel, announces Error 10, pulls left, or stops at startup.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.
The robot stops with Error 68 because its camera failed during the cleaning job.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The top lid stands proud, will not latch, or the robot reports Error 45 when a job starts.
The Clean Base reports a clog, leaks air, or releases dust from the path.
The robot is trapped, tilted, moved, or unable to continue a clear path.

Failure Modes

part