Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
The jet pulses irregularly, sprays off-pattern, or carries visible contaminated water.
Water sprays, but the stream is shorter or weaker than normal.
Water escapes while filling, carrying, cleaning, or storing the robot.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The pass count or spray behavior does not match the installed wet, damp, or dry pad.
The bumper remains pressed or collisions repeat after ordinary floor clearing.
The robot is trapped, tilted, moved, or unable to continue a clear path.
The pack will not charge, or the charger light stays off or shows an abnormal red pattern.
Pulling the eject control under the handle does not drop or free the installed pad.
A straight bit stays clamped but rotates off-center, or the chuck body has visible play.
A battery message remains after a pack is installed and the cover is closed.
A cleaning run begins, then the robot cannot back away from the base.
A full-bin indication remains after the bin has been emptied and reinstalled.
A remaining rattle, grind, squeal, or vibration persists after adjacent parts clear.
CLEAN stays dark after the robot has rested on a powered Clean Base.
Home is requested, yet the robot misses the Clean Base or will not settle.
The app can move the robot, but the top buttons do nothing locally.
The bin will not seat flush, the filter will not stay placed, or detection fails.
The brush-frame door sits proud, springs open, or will not latch securely.
The Clean Base does not evacuate the bin after self-dock or app command.
FM-21: THE SPRAY SPUTTERS, IS UNEVEN, OR CONTAINS RESIDUE
FM-20: THE PRECISION JET SPRAY IS TOO WEAK
FM-26: THE ROBOT CHOOSES THE WRONG MOTION OR WETNESS FOR THE PAD
FM-22: WATER LEAKS FROM THE CAP OR BODY
FM-15: THE PRECISION JET SPRAY IS WEAK, DELAYED, OR ABSENT
FM-19: NO WATER SPRAYS OR THE FLOOR STAYS DRY
FM-12: THE FRONT BUMPER STAYS PRESSED OR REPEATED COLLISIONS CONTINUE
FM-11: DRIVE-WHEEL MOVEMENT IS JAMMED, CIRCULAR, OR PULLS TO ONE SIDE
FM-17: THE DUAL MULTI-SURFACE BRUSHES ARE JAMMED OR DAMAGED
FM-18: THE BRUSH-FRAME DOOR WILL NOT CLOSE OR LATCH SECURELY
FM-19: THE CORNER BRUSH IS STUCK, LOOSE, OR DOES NOT ROTATE
FM-21: THE BIN OR FILTER WILL NOT SEAT, LATCH, OR BE DETECTED
FM-22: THE FULL BIN INDICATION REMAINS AFTER EMPTYING
FM-27: THE CLEAN BASE REPORTS A CLOG OR LEAK IN THE EVACUATION PATH
FM-05: THE BATTERY IS NOT DETECTED, NOT COMMUNICATING, OR A BATTERY FAULT REMAINS
FM-06: RUNTIME IS MUCH SHORTER THAN THE ESTABLISHED BASELINE
FM-15: THE REAR CASTER DRAGS, SQUEAKS, WOBBLES, OR WILL NOT SWIVEL FREELY
FM-25: THE CLEAN BASE WILL NOT EMPTY THE BIN AUTOMATICALLY OR MANUALLY
FM-26: THE CLEAN BASE REPORTS A FULL OR MISSING BAG AFTER THE BAG IS CHECKED
FM-20: PICKUP OR AIRFLOW IS WEAK, STALLED, OR A VACUUM PROBLEM PERSISTS