Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
No motor or chuck response
A charged, latched battery and normal trigger command produce no chuck rotation.
The cool drill begins to run, then stops during a brief no-load test or light work.
A charged, latched battery and normal lock-off and trigger command produce no blade stroke.
The cool saw starts, then stops during a brief no-load test or light cut before heat builds.
Dry debris remains after cleaning or the vacuum path sounds weak or stalled.
With a secure known-good blade clear of the work, the saw has harsh sound, bind, or vibration.
The charger indicates charging but does not reach solid green in the expected charging period.
With the battery removed and no bit fitted, the chuck will not hand-turn normally or feels seized.
The drill runs steadily but drills slowly or cannot drive a normal fastener with correct setup.
Pressing CLEAN produces no light, sound, or response, whether the robot is on or off the Home Base.
A straight bit stays clamped but rotates off-center, or the chuck body has visible play.
Pressing CLEAN produces no light, tone, or movement.
The Clean Base has no status response or cannot pass charge to the robot.
A battery message remains after a pack is installed and the cover is closed.
A cleaning run begins, then the robot cannot back away from the base.
A remaining rattle, grind, squeal, or vibration persists after adjacent parts clear.
Charging starts only after repositioning or drops out before completion.
CLEAN stays dark after the robot has rested on a powered Clean Base.
Home is requested, yet the robot misses the Clean Base or will not settle.
FM-08: CHUCK WILL NOT OPEN, CLOSE, OR ACCEPT A BIT
FM-01: DRILL HAS NO MOTOR OR CHUCK RESPONSE
FM-13: CHUCK OR SPINDLE IS HARD TO TURN AT REST
FM-14: NO-LOAD STROKE GRINDS, KNOCKS, BINDS, OR VIBRATES
FM-04: DRILL CUTS OUT WHILE COOL
FM-14: DRILL GRINDS OR VIBRATES AT NO LOAD
FM-15: FM-15 TOOL, BATTERY, OR CHARGER OVERHEATS
FM-05: TRIGGER STICKS OR SPEED CONTROL IS UNSAFE
FM-01: FM-01 SAW HAS NO BLADE-STROKE RESPONSE
FM-04: SAW STARTS, THEN CUTS OUT WHILE COOL
FM-20: PICKUP OR AIRFLOW IS WEAK, STALLED, OR A VACUUM PROBLEM PERSISTS
FM-16: IMMEDIATE BATTERY, CHARGER, LIQUID, OR STRUCTURAL HAZARD
FM-13: TWO-TONE DISTRESS SOUND FOLLOWED BY 8 BEEPS
FM-18: A WHEEL CLICKS, GRINDS, OR BINDS BUT STILL TURNS
FM-03: BATTERY WILL NOT CHARGE
FM-05: LOCK-OFF OR TRIGGER WILL NOT CONTROL SAFELY
FM-10: STRAIGHT BIT WOBBLES OR CHUCK IS LOOSE
FM-32: THE CLEAN BUTTON, LIGHTS, OR TONES RESPOND ABNORMALLY
FM-02: THE WALL CHARGER HAS NO INDICATOR OR POWER
FM-05: THE BATTERY IS NOT DETECTED, NOT COMMUNICATING, OR A BATTERY FAULT REMAINS