Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

A charged, latched battery and normal trigger command produce no chuck rotation.
No motor or chuck response
A charged, latched battery and normal lock-off and trigger command produce no blade stroke.
With the battery removed and no bit fitted, the chuck will not hand-turn normally or feels seized.
The chuck opens and closes, but the bit slips, pulls out, or ejects during normal work.
The drill runs steadily but drills slowly or cannot drive a normal fastener with correct setup.
Forward or reverse will not engage, or the center position will not lock the trigger.
The tool, pack, or charger becomes unusually hot, or protection repeatedly stops operation.
The robot moves, but one wheel makes repeatable noise or feels rough through rotation.
A straight bit stays clamped but rotates off-center, or the chuck body has visible play.
The pad no longer lies flat and interferes with smooth travel.
The robot drives and sprays, but the cleaning head lacks its normal scrubbing vibration with a wet pad.
The robot runs normally but the charged battery lasts far less than a typical job.
The robot will not start, or stops after a pad falls off, and reports three beeps.
The 200-series robot is awake nearby, but the iRobot app cannot add or connect to it.
The correct wet or damp cycle leaves pooling or substantially more water than expected.
The robot reports four beeps immediately after an attempted start.
The pack will not charge, or the charger light stays off or shows an abnormal red pattern.
A wet or damp pad is installed, but the robot produces no spray and leaves the floor dry.
A battery message remains after a pack is installed and the cover is closed.

Failure Modes

part