搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The drill works at no load but stalls, slows severely, or stops during drilling or driving.
The trigger binds, the drill runs on, or no-load speed jumps instead of varying smoothly.
The front work light stays dark during trigger use or remains on abnormally afterward.
The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
The forward/reverse lever binds, commands the wrong direction, or center lock fails.
Il grilletto si blocca, il trapano continua a girare o la velocità a vuoto salta invece di variare dolcemente.
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
電鑽冇motor、夾頭或工作燈反應，即使用咗已知充滿電嘅battery。
motor는 들리지만 척은 움직이지 않거나 간헐적으로만 회전함.
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
battery唔能滑入、鎖定、釋放或保持穩固喺手柄。
電池包唔能完成充電或運行時間異常短。
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The chuck coasts much longer than normal after the trigger is released.
The tool or pack smokes, leaks, swells, smells burned, overheats severely, or exposes wiring.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
전력이 불규칙하거나 감소하며, 비정상적인 motor 소음이 발생하거나 brush 스파크가 과도함.
The torque ring binds, will not hold a setting, or slips at clearly wrong torque.
fm-p14-b-387bc595: O anel de torque prende, não mantém a configuração ou escorrega em
fm-p15-b-8295d515: The chuck sleeve or jaws bind, fail to center, trap a bit,
FM-07: FM-07 THE GEAR SHIFTER WILL NOT MOVE, HOLD, OR CHANGE RANGE
FM-04: FM-04 THE TRIGGER STICKS, RUNS ON, OR SPEED RESPONSE IS UNSAFE
FM-03: FM-03 THE BATTERY DOES NOT PROVIDE A NORMAL USABLE CHARGE CYCLE
FM-05: FM-05 方向桿卡住、選錯或者唔會鎖定關閉
FM-02: FM-02 THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
FM-10: FM-10 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD
FM-12: FM-12 WIERTARKA ZATRZYMUJE SIĘ, TRACI MOC LUB ZATRZYMUJE POD OBCIĄŻENIEM
FM-16: FM-16 FUM, LICHID, UMFLĂTURI, MIROS DE ARS SAU DAUNE MAJORE SUNT PREZENTE
FM-21: 離合器過早鬆開或喺鑽孔模式打滑
FM-09: FM-09 THE KEYLESS CHUCK JAWS WILL NOT OPEN, CLOSE, RELEASE, OR GRIP
FM-08: The torque ring binds, will not hold a setting, or slips at clearly wrong torque.
FM-15: FM-15 钻机磨损、敲击、振动或夹头松动
FM-06: FM-06 電動剎車唔能快速停止夾頭
fm-1-1: FM-01 THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
FM-11: FM-11 THE MOTOR RUNS BUT THE CHUCK DOES NOT ROTATE
FM-23: 鑽頭喺夾頭滑動或拉出
FM-14: FM-14 電鑽空載時磨損或震動
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
brush seco y suave
充滿電嘅已知良好battery
approved charger
Correct sharp bit
Correct screwdriver
One-half-inch keyless chuck
起子頭或者起子頭座
模式或者扭力領圈
相容嘅 battery
充電器同指示燈
可變速扳機
機載鑽頭架
En rak rundskaftad borrbits
arbetsstycke
En godkänd battery laddare
Ett kompatibelt 12V MAX* battery paket
Resirkuleringsrute for skadet litium
Cool known-good Bosch 18V battery
Halbzoll-Schlag-Steckschlüssel
Correct impact bit