model
CMCB204
CRAFTSMAN CMCB204係一個20V MAX / 18V 標稱4.0 Ah 鋰離子 battery 電池組,設計用於V20無線電動工具平台。佢有密封可拆設計,配備三個LED電量指示燈,兼容多款CRAFTSMAN V20工具。
1 次下载 · 报告的成功维修率 0%
型号详情
型号: CMCB204
亦称: Craftsman, CMCB204, CRAFTSMAN Tools
症状
- Gauge LEDs jump or disagree sharply with charge state and runtime.
Gauge LEDs jump or disagree sharply with charge 1. Fully charge, rest at room temperature, and read gauge twice.
- Temperature delay persists after pack and charger stabilize indoors.
Temperature delay persists after pack and charger 1. Unplug charger; move pack and charger to a dry indoor area.
- 按住電量按鈕喺室溫下冇LED指示。
按住電量顯示按鈕 1. 拆除電池組,喺室內按住量度按鈕。
- The full-indicating pack runs a task far less than a healthy pack.
The full-indicating pack runs a task far less than a 1. Fully charge pack, rest indoors, and record the gauge.
- 兩個已知良好兼容工具對已充電電池組無反應。
兩個已知良好兼容工具對充滿電嘅電池組冇反應。 1. 拆除電池組;檢查外殼、卡扣、導軌、接觸點同指示燈。
- The cool, fully charged pack starts a verified tool, then shuts it off during a brief no-load or light-load test.
The cool, fully charged pack starts a verified tool, then 1. Release control, remove pack, and eliminate the tool load.
- The pack overheats or repeatedly triggers thermal shutdown during a verified light task after starting cool.
The pack overheats or repeatedly triggers thermal 1. Release control, set tool down, and remove pack only if safe.
- A powered compatible charger shows no response to the seated pack.
A powered compatible charger shows no response to 1. Unplug charger; remove pack and inspect both dry interfaces.
- The pack will not slide fully, latch securely, or release normally.
The pack will not slide fully, latch securely, or release 1. Support both items; stop forcing, twisting, or prying.
- The pack is swollen, leaking, hissing, smoking, burning, crushed, wet, or opened.
The pack is swollen, leaking, hissing, smoking, 1. Clear people from the area; do not handle a hot or venting pack.
- The pack gets excessively hot, smells, discolors, or stops charging.
The pack gets excessively hot, smells, discolors, or 1. Unplug AC first; remove pack only if safe and isolate it.
故障模式
- FM-13: 充電時電池組異常發熱
FM-13 充電時電池組異常發熱
- FM-05: 熱冷延遲喺室溫下持續存在
FM-05 熱冷延遲喺室溫下持續存在
- FM-01: BATTERY 喺已驗證工具中冇輸出
FM-01 BATTERY 喺已驗證工具中冇輸出
- FM-06: 電池組喺輕負載下冷卻時斷電
FM-06 電池組喺輕負載下冷卻時斷電
- FM-10: 燃料表按鈕冇LED反應
FM-10 燃料表按鈕冇LED反應
- FM-16: 即時 BATTERY 安全危害
FM-16 即時 BATTERY 安全危害
- FM-11: 燃料表讀數不穩定或不合理
FM-11 燃料表讀數不穩定或不合理
- FM-14: 工具使用期間電池組異常發熱
FM-14 工具使用期間電池組異常發熱
- FM-07: 經驗證負載下電力不足
FM-07 經驗證負載下電力不足
- FM-08: 運行時間比正常短好多
FM-08 運行時間比正常短好多
- FM-04: 充電開始但永遠充唔滿
FM-04 充電開始但永遠充唔滿
- FM-15: 端子燒焦、有凹坑、熔化或電弧
FM-15 端子燒蝕、凹坑、熔化或者電弧
相关故障排除
Common symptoms
- Gauge LEDs jump or disagree sharply with charge state and runtime.
- Temperature delay persists after pack and charger stabilize indoors.
- 按住電量按鈕喺室溫下冇LED指示。
- The full-indicating pack runs a task far less than a healthy pack.
- A contact is pitted, loose, melted, discolored, or arcs in use.
- 兩個已知良好兼容工具對已充電電池組無反應。
- The cool, fully charged pack starts a verified tool, then shuts it off during a brief no-load or light-load test.
- The pack overheats or repeatedly triggers thermal shutdown during a verified light task after starting cool.
- A powered compatible charger shows no response to the seated pack.
- The pack will not slide fully, latch securely, or release normally.