Reparatiegidsen zoeken
Vind reparatiegidsen, handleidingen, symptomen en foutcodes in de kennisbank.
Rook, vloeistof, zwelling of grote schade
Rook, vlam, vonken, vloeistof, beschadigde kabel, battery-schade of blootliggende structuur is aanwezig.
Rook, vloeistof, kabel- of accuschade
Rook, vonken, vloeistof, zwelling, lekkage, brandlucht, blootgestelde onderdelen of gebarsten structuur aanwezig
HET GEREEDSCHAP OF BATTERY GEEFT ROOK, VLOEISTOF, ZWELLING OF BRANDGEUR AF
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
FM-16: FM-16 ONMIDDELLIJK BATTERY, LADER, VLOEISTOF OF STRUCTUREEL GEVAAR
FM-16: FM-16 HET GEREEDSCHAP OF BATTERY HEEFT ROOK, VLOEISTOF, ZWELLING OF BRANDGEUR
FM-05: FM-05 TREKKER BLIJFT HANGEN OF SNELHEIDSREGELING IS ONVEILIG
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD