수리 가이드 검색

지식 베이스에서 수리 가이드, 매뉴얼, 증상 및 오류 코드를 찾으세요.

모델

매뉴얼

증상

With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.
Wiertarka działa stabilnie, ale wierci wolno lub nie może wkręcić normalnego elementu mocującego przy prawidłowym ustawieniu.
THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
LED 작업등이 켜지지 않거나 비정상적으로 켜져 있음
The drill stops early or gives far less runtime than expected without unusual heat.
The drill or battery becomes rapidly or severely hot, or little cooling air can move through the tool vents.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
The chuck jaws bind, will not release a bit, close unevenly, or cannot grip a straight round shank.
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The bit jams, the motor stalls, or the drill twists sharply in the hands during work.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.

고장 모드

part