FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE

FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE

• Gear or motor pinion connection has failed
• Impact hammer or anvil is broken or disconnected
• Internal bearing or drive part is jammed
• Severe wear has stripped the transmission path

1. Motor rotation is transmitted to a stable rotating anvil, or the tool is removed for service.

1.

이것은 전체 수리 매뉴얼에 포함된 문제 해결 안내의 미리보기입니다.

• The motor can be heard, but the front output remains still in both directions with the bit removed.

  The motor can be heard, but the front output remains 1. Release the trigger, remove the battery, and remove the bit if it can be done

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

공개 페이지에는 미리보기만 표시됩니다. 전체 수리 단계, 다이어그램 및 검증 절차를 다운로드하려면 전체 매뉴얼을 구매하세요.