failure mode
FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
The accessory bit binds, causing the tool to stall, twist sharply, or stop unexpectedly in the work.
진단 개요
The accessory bit binds, causing the tool to stall, twist sharply, or stop unexpectedly in the work.
예상 근본 원인
- Bit or fastener is damaged, dull, or wrong for the task
- Tool is off-axis or the work is not secured
- Pilot hole or clearance is inadequate
- Load exceeds the tool, battery, or accessory capability
빠른 점검
- The correct accessory drives straight without binding, stalling, or uncontrolled reaction.
수리 미리보기
1.
이것은 전체 수리 매뉴얼에 포함된 문제 해결 안내의 미리보기입니다.
관련 증상
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The accessory catches or stops in the material and the 1. Release the trigger and control the tool until all motion stops.
전체 매뉴얼에 포함
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
공개 페이지에는 미리보기만 표시됩니다. 전체 수리 단계, 다이어그램 및 검증 절차를 다운로드하려면 전체 매뉴얼을 구매하세요.