수리 가이드 검색
지식 베이스에서 수리 가이드, 매뉴얼, 증상 및 오류 코드를 찾으세요.
BATTERY WILL NOT SEAT, LATCH, OR RELEASE
Naładowany, zatrzaśnięty battery i normalne polecenie spustu nie powodują obrotu uchwytu.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
The bit jams, the motor stalls, or the drill twists sharply in the hands during work.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
Bit jams or drill stalls
Unit shuts off abruptly
Bladet lämnar linjen, böjs överdrivet, böjs eller går av under en annars kontrollerad skärning.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-08: FM-08 척이 열리지 않거나 닫히지 않거나 비트를 수용하지 않음
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-13: Fm-13 전기 브레이크가 블레이드를 즉시 멈추지 않음
FM-08: FM-08 설치된 블레이드가 해제되지 않음
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-08: FM-08 키리스 척 조가 열리지 않거나 닫히지 않거나 해제되지 않거나 잡지 못함
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE