BOSCH GSR12V-140FCB22 किट BATTERY (BAT414) - मरम्मत और रखरखाव मैनुअल मरम्मत मैनुअल
Bosch BAT414 12V मैक्स लिथियम-आयन battery पैक के लिए व्यापक मरम्मत और रखरखाव निर्देश, जिसमें समस्या निवारण, सुरक्षा, और प्रतिस्थापन मार्गदर्शन शामिल है।
$39.99
Last updated Aug 7, 2026, 6:10 AM
Manual information
About this manual
Bosch BAT414 12V मैक्स लिथियम-आयन battery पैक के लिए व्यापक मरम्मत और रखरखाव निर्देश, जिसमें समस्या निवारण, सुरक्षा, और प्रतिस्थापन मार्गदर्शन शामिल है।
0% Reported Successful Repair
$39.99
Full Manual Includes
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Table of contents preview
- Bosch Gsr12v-140fcb22 किट Battery (bat414) - मरम्मत और रखरखाव मैनुअल
- छह सबसे महत्वपूर्ण बातें
- इस मॉडल में वास्तव में क्या है
- संकेतक और सिग्नल मानचित्र
- मॉडल-संशोधन चेतावनी
- चार्ज और पावर पथ
- सामान्य उपयोग अनुक्रम
- सामान्य व्यवहार जो दोष जैसा दिख सकता है
- इस मॉडल में क्या नहीं है
- FM-10 आवरण, स्टेम, रिलीज टैब, टर्मिनल, बाधा, या पैक बॉडी क्षतिग्रस्त या सूजा हुआ है
- सामान्य लोड
- FM-11 BATTERY गीला था, डूबा हुआ था, या चालक या जंगली तरल के संपर्क में था
- गतिविधियां
- FM-08 BATTERY बिना धुआं, चिंगारियां, रिसाव, या सूजन के असामान्य रूप से गर्म हो जाता है
- FM-15
This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.
Likely Root Causes
- The pack is discharged, too hot or cold, or in a protection state
- Terminal faces are dirty, wet, damaged, or not aligned
- The insertion stem stops before the electrical seat even though the pack looks inserted
- The sealed cell, conductor, terminal, or protection path has failed
- The comparison tool, rather than the battery, has failed
- The application is binding, stalled, overloaded, or using a damaged bit or attachment
- The pack is near empty, overheated, overcooled, or in protection
- Dirty or resistive contacts heat or interrupt current
- The sealed cell, conductor, temperature, or protection path is weak
- The tool has abnormal drag or its own electronic fault
- The battery is not fully charged or is at an extreme temperature
- Contact resistance from dirt, wear, or damage limits current
- The bit, attachment, fastener, or work interface is binding, dull, damaged, or overloaded
- The sealed cells or internal links have lost power capability
- The tool motor or controller is weak
- The pack has aged or lost usable cell capacity
- The full indication came from a charger or contact problem
- Cold, heat, a heavy drill/driver task, or tool drag raised energy demand
- Dirty contacts created loss and heat
- The comparison task or tool condition was not equivalent
- The sealed cells have high self-discharge or an internal leakage path
- The pack was not actually full before storage
- Storage was hot, wet, conductive, or near metal
- The battery was left in a tool that drew standby current
- The comparison interval or starting state was not controlled
- The insertion stem, guide surfaces, or seating stops are worn, dirty, or distorted
- Battery contacts are recessed, contaminated, loose, or damaged
- The charger contact carrier or slot is damaged
- The release tabs or seating geometry do not hold the electrical interface
- An internal battery terminal link is movement-sensitive
- The tool or work is stalled, overloaded, or binding
- Charging or use occurred in a hot environment with poor ventilation
- Dirty or resistive contacts are generating heat
- The pack has an internal cell, conductor, or protection defect
- The charger or tool is driving an abnormal condition
- Internal cell short, thermal runaway, or conductor failure
- Severe impact, puncture, crushing, fire, or excessive heat exposure
- Liquid or conductive contamination caused a short
- Improper charger, adapter, direct terminal connection, or modification
- A damaged pack was charged or used
- Drop, impact, crushing, puncture, or tool/charger ejection
- Heat, age, internal gas generation, or cell swelling
- Forced insertion, prying, adapters, or release-tab abuse
- Conductive/corrosive contamination damaged contacts or barriers
- A prior repair or modification compromised the sealed housing
- Rain, hose, puddle, submersion, or wet storage
- Salt, pool, bleach, cleaner, or chemical exposure
- Liquid entered through the terminal area or housing seam
- The pack was placed in a wet charger or tool
- A user attempted washing or liquid cleaning
- One or both release tabs or a mating catch are jammed, broken, or loaded sideways
- Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
- The pack was forced, twisted, or inserted with an adapter
- The tool or charger housing is damaged
- The interface is still energized or the tool is under mechanical load
- Battery contacts are worn, recessed, contaminated, loose, or damaged
- The insertion stem or release tabs permit electrical movement even though retention feels secure
- The internal terminal link is movement-sensitive
- The tool contact carrier or wiring is damaged
- Hand pressure is masking an unsafe interface fault
- The outlet or charger has no power or is faulty
- The pack is outside the allowed charging temperature range
- Contacts or guides are dirty, wet, damaged, or not fully seated
- The charger is not designated for the battery platform
- The sealed cell, temperature, conductor, terminal, or protection path has failed
- Wrong battery platform, identity mismatch, or an adapter is being attempted
- Debris obstructs the insertion stem, guide surfaces, tool cavity, or charger socket
- The stem, guide rib, seating stop, housing, or mating cavity is distorted
- Contacts or insulating barriers are bent or displaced
- The tool or charger interface, rather than the battery, is damaged
- A side release tab is dirty, cracked, worn, broken, or not returning
- The mating catch in the tool is worn or damaged
- The insertion stem or guide geometry misaligns the retaining tabs
- The housing is distorted even though insertion is possible
- The pack was not pushed fully to the normal seated stop
Supported model
Related Models
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Bosch
View details
Common Symptoms
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
Failure Modes
Summary
पूरी तरह से डाला गया, बाहरी रूप से सही BAT414 battery संगत Bosch 12V मैक्स टूल में कोई उपयोगी आउटपुट उत्पन्न नहीं करता है।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
battery स्टोर करते समय और डिस्कनेक्ट होने पर तेजी से चार्ज खो देता है, और एक छोटे ठंडे, सूखे भंडारण अंतराल के बाद उपयोगी नहीं रह जाता है।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
चार्जिंग तब शुरू या बंद होती है जब battery को कुछ स्थितियों में हिलाया या पकड़ा जाता है, अस्थिर संपर्क या आर्किंग के कारण।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
battery चार्जिंग, भंडारण, या टूल उपयोग के दौरान बिना धुआं, चिंगारी, रिसाव, या सूजन के असामान्य रूप से तेजी से गर्म हो जाता है।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
सक्रिय battery खतरा जिसमें धुआं, फुफकार, गैस निकलना, चिंगारियां, आग, पिघलना, या रिसाव शामिल है जो थर्मल रनअवे या गंभीर क्षति को दर्शाता है।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
battery पानी या चालक/क्षारीय तरल पदार्थ के संपर्क में आया था, जिससे क्षति या असुरक्षित स्थिति हुई।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
battery पूरी तरह या आंशिक रूप से जुड़ा हुआ है लेकिन सामान्य रिलीज ऑपरेशन और सीधे खींचने से हटाया नहीं जा सकता।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
टूल शुरू होता है लेकिन सामान्य लोड के तहत battery आउटपुट अचानक कट जाता है, जिससे अचानक पावर लॉस होता है।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Summary
battery पूरी तरह से डाला जाता है लेकिन एक या दोनों साइड रिलीज टैब इसे नहीं रोकते, या battery दोनों टैब दबाए बिना निकाला जा सकता है।
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Related Manuals
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details
View details