model
DCB115
DeWalt DCB115 एकल-पोर्ट लिथियम-आयन battery चार्जर है जो 12V MAX, 20V MAX, और FLEXVOLT battery पैक्स के लिए डिज़ाइन किया गया है। इसमें उत्तरी अमेरिकी बाजारों के लिए 120 V AC इनपुट और 4 A एकल-चरण चार्ज आउटपुट है।
0% Reported Successful Repair
Model details
Model number: DCB115
Also known as: DeWalt, DeWalt Tools, DeWalt Power Tools, DCB115
Repair manuals
Symptoms
- The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
yet been confirmed. and the charger for cracked rails; use FM-17 or FM-18 if found.
- POWER CORD OR PLUG IS DAMAGED, LOOSE, SCORCHED, OR HOT
Stop using it and unplug by the plug only if the connection is safe to POWER CORD OR PLUG IS DAMAGED, LOOSE, Remove the battery, unplug the charger, and take it off the wall before correcting the mount.
- चार्जर असामान्य रूप से गर्म या गीला हो जाता है या जलाए गए टर्मिनल होते हैं
पावर डिस्कनेक्ट करें और चार्जर और पैक को स्वाभाविक रूप से ठंडा होने दें। चार्जर असामान्य रूप से गर्म या गीला हो जाता है, या टर्मिनल जल गए हैं। क्षतिग्रस्त पैक को न डालें या पुनः चार्ज न करें; केवल सुरक्षित होने पर हटाएं।
- The red light keeps blinking while the yellow indicator stays on even after the battery and charger have naturally reached an allowed room-temperature environment.
The red light keeps blinking while the yellow indicator Remove the battery and let it reach normal room temperature naturally;
- Metal chips, grinding dust, steel wool, foil, or another dry conductive buildup is visible in the battery cavity, around contacts, or at ventilation slots. No liquid or active smoke, spark, burning, or melting is present.
Metal chips, grinding dust, steel wool, foil, or another dry 1. Unplug the charger and remove the battery before a conductive particle
- Liquid has entered the charger or battery interface, or the charger shows smoke, sparks, burning odor, charring, melting, or active electrical arcing.
Liquid has entered the charger or battery interface, or Warn other people away and disconnect power only from a safe
- एक पूरी तरह से बैठा, भौतिक रूप से ध्वनि संगत battery कोई लाल या पीली लाइट नहीं देता, जबकि वही DCB115 अन्य ज्ञात-सही संगत पैक्स को समान प्रमाणित आउटलेट से चार्ज करना शुरू करता है।
एक पूरी तरह से बैठा, भौतिक रूप से ध्वनि संगत battery चार्जर को अनप्लग करें और एकल अस्वीकृत पैक को हटा दें; इसे जांचें कि इसमें
- The attached cord or plug is cut, frayed, crushed, loose, discolored, scorched, or abnormally hot. There is no current smoke, spark, flame, melting charger housing, or liquid ingress.
The attached cord or plug is cut, frayed, crushed, loose, 1. Stop using the charger and unplug it by the plug only if the connection is
- A battery intended for the charger has physical damage, swelling, leakage, wetness, burned or melted terminals, or a deformed case. It may or may not still fit the charger.
A battery intended for the charger has physical damage, 1. Do not insert or recharge the damaged pack; if it is already in the
- The charger has dry visible structural damage to its upper or lower housing, tabletop feet, battery rails, retention area, contact support, or rear wall-mount slots. No liquid, smoke, spark, burning, or melting is active.
The charger has dry visible structural damage to its Unplug the charger and remove the battery before handling or flexing
- Independent checks show the battery charges and powers a tool normally, but the red or yellow indicator is too dim to read, remains stuck, stays on after pack removal, or does not match the label pattern.
Independent checks show the battery charges and Unplug the charger, remove the pack, and clean only the outside of the
- The charger housing becomes much hotter than normal charging warmth or operation repeatedly pauses as the charger heats, but there is no smoke, spark, burning odor, liquid, melting, swollen pack, or visible structural damage.
The charger housing becomes much hotter than normal Disconnect power, remove the battery, and let both complete items cool
Failure Modes
- FM-17: BATTERY फटा हुआ, सूजा हुआ, रिसाव, गीला, या जले हुए टर्मिनल हैं
FM-17 BATTERY फटा हुआ, सूजा हुआ, रिसाव, गीला, या जले हुए टर्मिनल हैं
- FM-03: BATTERY चार्जर में फंसा हुआ है या रिलीज़ नहीं होगा
FM-03 BATTERY चार्जर में फंसा हुआ है या रिलीज़ नहीं होगा
- FM-05: एक संगत पैक कोई लाइट उत्पन्न नहीं करता जबकि अन्य चार्ज करते हैं
FM-05 एक संगत पैक कोई लाइट उत्पन्न नहीं करता जबकि अन्य चार्ज करते हैं
- FM-15: चालक मलबा BATTERY गुफा या वेंट में है
FM-15 चालक मलबा BATTERY गुहा या वेंट्स में है
- FM-19: दीवार पर लगे चार्जर में स्लॉट्स ठीक होने पर भी हिलना या अलग होना
FM-19 दीवार पर लगे चार्जर में स्लॉट्स ठीक होने पर भी हिलना या अलग होना
- FM-06: पैक के कमरे के तापमान पर लौटने के बाद भी गर्म/ठंडा विलंब रहता है
FM-06 पैक के कमरे के तापमान पर लौटने के बाद भी गर्म/ठंडा विलंब रहता है
- FM-01: बैठे हुए पैक के साथ कोई संकेतक या चार्जिंग प्रतिक्रिया नहीं
FM-01 बैठे हुए पैक के साथ कोई संकेतक या चार्जिंग प्रतिक्रिया नहीं
- FM-02: BATTERY चार्जर में पूरी तरह से स्लाइड या सीट नहीं होगा
FM-02 BATTERY चार्जर में पूरी तरह से स्लाइड या बैठ नहीं पाता है
- FM-16: तरल प्रवेश किया है, या चार्जर धुआं, चिंगारी, जलता है, या पिघलता है
FM-16 तरल प्रवेश किया है, या चार्जर धुआं, चिंगारी, जलता है, या पिघलता है
- FM-13: चार्जर प्लग इन करने पर ब्रेकर या GFCI ट्रिप होता है
FM-13 चार्जर प्लग लगाने पर ब्रेकर या GFCI ट्रिप हो जाता है
- FM-11: संकेतक धुंधला, अटका हुआ, या गलत है जबकि चार्जिंग सामान्य है
FM-11 संकेतक धुंधला, अटका हुआ, या गलत है जबकि चार्जिंग सामान्य है
- FM-04: BATTERY बैठता है लेकिन चार्जर में सुरक्षित नहीं रहता
FM-04 BATTERY बैठता है लेकिन चार्जर में सुरक्षित नहीं रहता
Related troubleshooting
Common symptoms
- The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
- POWER CORD OR PLUG IS DAMAGED, LOOSE, SCORCHED, OR HOT
- चार्जर असामान्य रूप से गर्म या गीला हो जाता है या जलाए गए टर्मिनल होते हैं
- The red light keeps blinking while the yellow indicator stays on even after the battery and charger have naturally reached an allowed room-temperature environment.
- Metal chips, grinding dust, steel wool, foil, or another dry conductive buildup is visible in the battery cavity, around contacts, or at ventilation slots. No liquid or active smoke, spark, burning, or melting is present.
- Liquid has entered the charger or battery interface, or the charger shows smoke, sparks, burning odor, charring, melting, or active electrical arcing.
- एक पूरी तरह से बैठा, भौतिक रूप से ध्वनि संगत battery कोई लाल या पीली लाइट नहीं देता, जबकि वही DCB115 अन्य ज्ञात-सही संगत पैक्स को समान प्रमाणित आउटलेट से चार्ज करना शुरू करता है।
- The attached cord or plug is cut, frayed, crushed, loose, discolored, scorched, or abnormally hot. There is no current smoke, spark, flame, melting charger housing, or liquid ingress.
- A battery intended for the charger has physical damage, swelling, leakage, wetness, burned or melted terminals, or a deformed case. It may or may not still fit the charger.
- The charger has dry visible structural damage to its upper or lower housing, tabletop feet, battery rails, retention area, contact support, or rear wall-mount slots. No liquid, smoke, spark, burning, or melting is active.