model
GSR18V-190B22
Bosch GSR18V-190B22 एक 18V कॉर्डलेस ड्रिल/ड्राइवर किट है जिसमें 1/2-इंच की कीलेस चक, 1800 RPM तक परिवर्तनीय गति नियंत्रण, और एक मजबूत ब्रश्ड DC motor है जिसमें सुलभ कार्बन brushes हैं। यह पेशेवर और DIY उपयोग के लिए उच्च टॉर्क और बहुमुखी गियर रेंज के साथ डिज़ाइन किया गया है।
0% Reported Successful Repair
Model details
Model number: GSR18V-190B22
Also known as: Bosch Power Tools, Bosch, GSR18V-190B22
Symptoms
- The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
The chuck sleeve or jaws bind, fail to center, trap a bit, 1. Center-lock the trigger, remove the battery, and let the bit and chuck
- battery हैंडल में स्लाइड, लॉक, रिलीज़ या सुरक्षित नहीं रहता।
battery स्लाइड नहीं होगा, लॉक नहीं होगा, रिलीज़ नहीं होगा, या हैंडल में सुरक्षित नहीं रहेगा। 1. ड्रिल का समर्थन करें, रिलीज दबाएं, और पैक को बिना जोर लगाए बाहर स्लाइड करें।
- The drill works at no load but stalls, slows severely, or stops during drilling or driving.
The drill works at no load but stalls, slows severely, or 1. Release, wait for stop, center-lock, remove the battery, and free the bit.
- ड्रिल कोई motor, चक, या वर्क-लाइट प्रतिक्रिया नहीं देता जबकि प्रमाणित चार्ज्ड battery है।
ड्रिल कोई motor, चक, या कार्य-प्रकाश प्रतिक्रिया नहीं देता है। 1. ट्रिगर को केंद्र-लॉक करें, battery निकालें, और दोनों संपर्क सेटों का निरीक्षण करें।
- A bit that appears clamped slips in use or visibly wobbles in a no-load test.
A bit that appears clamped slips in use or visibly 1. Center-lock the trigger, remove the battery, and discard any bent bit.
- The top selector sticks, will not stay in range, or low and high feel the same.
The top selector sticks, will not stay in range, or low and 1. Set the drill down, release the trigger, wait for stop, center-lock, and
- पैक चार्जिंग पूरा नहीं करता या असामान्य रूप से कम हल्के उपयोग रनटाइम देता है।
पैक चार्जिंग पूरी नहीं करता या असामान्य रूप से कम लाइट-ड्यूटी रनटाइम देता है। 1. पैक निकालें, उसे कमरे के तापमान पर आने दें, और पैक तथा चार्जर का निरीक्षण करें।
- The chuck coasts much longer than normal after the trigger is released.
The chuck coasts much longer than normal after the 1. Center-lock the trigger, remove the battery, and empty the chuck.
- टॉर्क रिंग अटक जाता है, सेटिंग नहीं रखता, या स्पष्ट रूप से गलत टॉर्क पर फिसलता है।
टॉर्क रिंग अटकती है, सेटिंग नहीं रखती, या स्पष्ट रूप से गलत टॉर्क पर स्लिप करती है। 1. ट्रिगर को केंद्र-लॉक करें, battery निकालें, और चक को अनलोड करें।
- The front work light stays dark during trigger use or remains on abnormally afterward.
The front work light stays dark during trigger use or 1. Center-lock the trigger, remove the battery, and wipe the light window
- पावर अनियमित या कम है, असामान्य motor शोर आता है, या brush में अत्यधिक चिंगारी होती है।
पावर अनियमित या कम है, असामान्य motor शोर 1. ट्रिगर को केंद्र-लॉक करें, battery निकालें, और motor को पूरी तरह ठंडा होने दें।
- The trigger binds, the drill runs on, or no-load speed jumps instead of varying smoothly.
The trigger binds, the drill runs on, or no-load speed 1. If it runs on, release it, center-lock the trigger, and remove the battery.
Failure Modes
- FM-16: FM-16 धुंआ, तरल, सूजन, जलने की गंध, या प्रमुख क्षति मौजूद है
FM-16 धुंआ, तरल, सूजन, जलने की गंध, या प्रमुख क्षति मौजूद है
- FM-05: FM-05 दिशा लीवर अटकता है, गलत चयन करता है, या लॉक ऑफ नहीं होता।
FM-05 दिशा लीवर अटकता है, गलत चयन करता है, या लॉक ऑफ नहीं होता।
- FM-09: FM-09 कीलेस चक जबड़े नहीं खुलते, बंद होते, रिलीज़ होते, या पकड़ते।
FM-09 कीलेस चक जबड़े नहीं खुलते, बंद होते, रिलीज़ होते, या पकड़ते।
- FM-15: FM-15 ड्रिल पीसती है, ठोकर लगाती है, कंपन करती है, या चक में खेल है
FM-15 ड्रिल पीसती है, ठोकर लगाती है, कंपन करती है, या चक में खेल है
- FM-12: FM-12 ड्रिल लोड पर रुकती है, पावर खोती है, या बंद हो जाती है।
FM-12 ड्रिल लोड पर रुकती है, पावर खोती है, या बंद हो जाती है।
- FM-06: FM-06 इलेक्ट्रिक ब्रेक चक को जल्दी नहीं रोकता
FM-06 इलेक्ट्रिक ब्रेक चक को जल्दी नहीं रोकता
- FM-14: FM-14 बिल्ट-इन वर्क लाइट जलती नहीं है या चालू रहती है
FM-14 बिल्ट-इन वर्क लाइट जलती नहीं है या चालू रहती है
- FM-13: FM-13 कार्बन BRUSHES घिसे हुए, चिपके हुए, या भारी आर्किंग कर रहे हैं
FM-13 कार्बन BRUSHES घिसे हुए, चिपके हुए, या भारी आर्किंग कर रहे हैं
- FM-08: FM-08 क्लच रिंग नहीं हिलती, नहीं टिकती, या स्लिप नियंत्रित नहीं करती।
FM-08 क्लच रिंग नहीं हिलती, नहीं टिकती, या स्लिप नियंत्रित नहीं करती।
- fm-p14-b-387bc595: टॉर्क रिंग अटक जाता है, सेटिंग नहीं रखता, या फिसलता है
1. ट्रिगर केंद्र-लॉक करें, battery निकालें, और चक को अनलोड करें।
- FM-10: FM-10 A सुरक्षित बिट स्लिप करता है, डगमगाता है, या नो-लोड पर रन आउट होता है।
FM-10 A सुरक्षित बिट स्लिप करता है, डगमगाता है, या नो-लोड पर रन आउट होता है।
- FM-11: Fm-11 Motor चलता है लेकिन चक नहीं घूमता।
Fm-11 Motor चलता है लेकिन चक नहीं घूमता।
Related troubleshooting
Common symptoms
- The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
- battery हैंडल में स्लाइड, लॉक, रिलीज़ या सुरक्षित नहीं रहता।
- The drill works at no load but stalls, slows severely, or stops during drilling or driving.
- ड्रिल कोई motor, चक, या वर्क-लाइट प्रतिक्रिया नहीं देता जबकि प्रमाणित चार्ज्ड battery है।
- A bit that appears clamped slips in use or visibly wobbles in a no-load test.
- The top selector sticks, will not stay in range, or low and high feel the same.
- पैक चार्जिंग पूरा नहीं करता या असामान्य रूप से कम हल्के उपयोग रनटाइम देता है।
- The chuck coasts much longer than normal after the trigger is released.
- टॉर्क रिंग अटक जाता है, सेटिंग नहीं रखता, या स्पष्ट रूप से गलत टॉर्क पर फिसलता है।
- The front work light stays dark during trigger use or remains on abnormally afterward.