搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
底座可设定角度，但斜切杆锁定后仍移动或切割时漂移。
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
锁定0度斜切时，声音正常的刀片与底座不垂直。
The motor can be heard, but the front output remains still in both directions with the bit removed.
No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
motor 和轴转动，但刀片在垫圈上卡滞或滑动，正常支撑切割时发生。
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.
A suitable bag or vacuum collects little dust while the port remains secure and aimed.
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
安装了正确的battery，但按下锁定按钮时触发器无motor响应。
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
fm-p17-b-80df6c98: Support the battery, press the release, and slide it forward only to the secondary
fm-p17-b-2db8b3a0: 兼容的 battery 无法完全插入机壳或会卡住
FM-24: FM-24 下护罩无法及时关闭
fm-p21-b-2e87769a: 刀片损坏、不适合木材或不符合要求
fm-p22-b-26b8fdae: The shaft lock is engaged, but the blade stud cannot be turned
FM-23: 下护罩阻力大或无法完全移动
FM-13: 轴锁已啮合，但刀片定位销无法转动
fm-p29-b-beec475a: The selected depth will not remain fixed after the depth lever is
FM-27: 深度设定后无法保持固定
FM-03: FM-03 BATTERY无法滑入、就位或锁定
FM-14: FM-14 轴锁无法啮合或保持
FM-31: FM-31 底座弯曲、开裂、松动或无法平放
FM-01: FM-01 工具完全无电 - 无 MOTOR 反应
FM-04: battery 卡在锯内无法取出
FM-32: FM-32 除尘效果弱或除尘通道堵塞
FM-07: FM-07 触发器卡滞或释放后 MOTOR 继续运行
FM-36: FM-36 锯仅在刀片接触工件时抖动或振动
FM-34: FM-34 锯片卡住、停转或切割时反冲
FM-29: FM-29 斜切设置滑动或无法保持所选角度
FM-35: FM-35 锯片平稳旋转但切割缓慢、烧焦或需用力