model
CMCB204
CRAFTSMAN CMCB204是一个20V最大/18V标称4.0 Ah锂离子battery电池组,设计用于V20无绳电动工具平台。它采用密封可拆卸设计,配备三LED电量指示灯,兼容多种CRAFTSMAN V20工具。
1 次下载 · 报告的成功维修率 0%
型号详情
型号: CMCB204
亦称: Craftsman, CMCB204, CRAFTSMAN Tools
症状
- Gauge LEDs jump or disagree sharply with charge state and runtime.
Gauge LEDs jump or disagree sharply with charge 1. Fully charge, rest at room temperature, and read gauge twice.
- Temperature delay persists after pack and charger stabilize indoors.
Temperature delay persists after pack and charger 1. Unplug charger; move pack and charger to a dry indoor area.
- 按住电量指示按钮在室温下无LED显示。
按住电量状态按钮 1. 取下电池组,室内按住仪表按钮。
- The full-indicating pack runs a task far less than a healthy pack.
The full-indicating pack runs a task far less than a 1. Fully charge pack, rest indoors, and record the gauge.
- 两个已知良好的兼容工具对已充电电池组无响应。
两个已知良好的兼容工具对充满电的电池组无响应 1. 取出电池组;检查外壳、锁扣、导轨、接触点和指示器。
- The cool, fully charged pack starts a verified tool, then shuts it off during a brief no-load or light-load test.
The cool, fully charged pack starts a verified tool, then 1. Release control, remove pack, and eliminate the tool load.
- The pack overheats or repeatedly triggers thermal shutdown during a verified light task after starting cool.
The pack overheats or repeatedly triggers thermal 1. Release control, set tool down, and remove pack only if safe.
- A powered compatible charger shows no response to the seated pack.
A powered compatible charger shows no response to 1. Unplug charger; remove pack and inspect both dry interfaces.
- The pack will not slide fully, latch securely, or release normally.
The pack will not slide fully, latch securely, or release 1. Support both items; stop forcing, twisting, or prying.
- The pack is swollen, leaking, hissing, smoking, burning, crushed, wet, or opened.
The pack is swollen, leaking, hissing, smoking, 1. Clear people from the area; do not handle a hot or venting pack.
- The pack gets excessively hot, smells, discolors, or stops charging.
The pack gets excessively hot, smells, discolors, or 1. Unplug AC first; remove pack only if safe and isolate it.
故障模式
- FM-13: 充电时电池组异常发热
FM-13 充电时电池组异常发热
- FM-05: 室温下热冷延迟持续存在
FM-05 室温下热冷延迟持续存在
- FM-01: BATTERY在已验证工具中无输出
FM-01 BATTERY在已验证工具中无输出
- FM-06: 电池组在轻负载下冷却时断电
FM-06 电池组在轻负载下冷却时断电
- FM-10: 电量计按钮无LED显示
FM-10 电量计按钮无LED显示
- FM-16: 立即的BATTERY安全隐患
FM-16 立即的BATTERY安全隐患
- FM-11: 电量计读数不稳定或不合理
FM-11 电量计读数不稳定或不合理
- FM-14: 工具使用时电池组异常发热
FM-14 工具使用时电池组异常发热
- FM-07: 已验证负载下电力不足
FM-07 已验证负载下电力不足
- FM-08: 运行时间远短于正常水平
FM-08 运行时间远短于正常水平
- FM-04: 充电开始但未完成
FM-04 充电开始但未完成
- FM-15: 端子烧蚀、凹坑、熔化或电弧
FM-15 端子烧蚀、凹坑、熔化或电弧
相关故障排除
Common symptoms
- Gauge LEDs jump or disagree sharply with charge state and runtime.
- Temperature delay persists after pack and charger stabilize indoors.
- 按住电量指示按钮在室温下无LED显示。
- The full-indicating pack runs a task far less than a healthy pack.
- A contact is pitted, loose, melted, discolored, or arcs in use.
- 两个已知良好的兼容工具对已充电电池组无响应。
- The cool, fully charged pack starts a verified tool, then shuts it off during a brief no-load or light-load test.
- The pack overheats or repeatedly triggers thermal shutdown during a verified light task after starting cool.
- A powered compatible charger shows no response to the seated pack.
- The pack will not slide fully, latch securely, or release normally.