搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
Klemmen vil ikke bevege seg
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
Shoe is loose or bent
Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
Bladet håller inte fastspänt
免工具刀片夹具释放杆无法完全打开或安全关闭。
Den kalla sågen startar, men stannar under ett kort tomgångstest eller lätt snitt innan värme byggs upp.
Laddaren startar inte eller slutför inte laddning, eller dess gröna lampa beter sig onormalt.
底板弯曲、开裂、松动或在平面上摇晃
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
fm-p13-b-17e1d6d1: 锁止或触发卡滞，无法完全移动，启动
FM-08: FM-08 安装的刀片无法释放
FM-14: FM-14 空载行程磨擦、敲击、卡滞或振动
FM-12: FM-12 锯在切割中跳动、振动或反弹
FM-11: FM-11 刀片偏移、弯曲或断裂
FM-16: FM-16 立即BATTERY、充电器、液体或结构危险
FM-03: Fm-03 Battery 无法充电
FM-01: Fm-01 锯无刀片行程响应
FM-09: FM-09 鞋子弯曲、松动或无法旋转
FM-04: FM-04 锯启动后冷却时切断
FM-02: FM-02 BATTERY 无法就位、锁定或释放
FM-10: 切割不方正或斜切角度不准确
FM-31: FM-31 底座弯曲、开裂、松动或无法平放
FM-06: MOTOR运转但刀片不转
FM-10: FM-10 直钻头晃动或夹头松动
FM-27: 挂钩松动、弯曲、开裂或无法安全收纳
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-09: FM-09 批头、套筒或输出驱动摇摆或偏心运行
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE