FM-06: MOTOR运转但刀片不转

FM-06 MOTOR运转但刀片不转

• Blade bolt or outer washer is loose or assembled wrong
• Blade is not seated on the spindle
• Blade bolt or washer is damaged
• Gear train or spindle has stripped or broken
• Spindle lock damage is interfering with the drive

1. The securely mounted blade follows the spindle immediately and runs without slipping.

1. Inspect blade seating, rotation direction, outer washer, and the left-hand blade bolt; engage the spindle lock only while stopped and tighten the bolt counterclockwise.
2. With the battery removed, rotate the blade gently by hand and verify the spindle turns with it without clamp slip, grinding, or abnormal free play.
3. If the motor runs but the correctly clamped spindle or blade still does not drive, stop testing and have the gear train, spindle, and lock serviced.
4. Release the trigger, wait for all motion to stop, remove the battery, and do not run the saw again until the blade drive is checked.

这是完整维修手册中所含故障排除指南的预览。

• Motor 运行但锯片不转

  Motor 运行但锯片不转 锯片夹紧、齿轮或主轴驱动故障；使用 FM-06。

• 能听到motor运转声，但刀片静止、启动迟缓或打滑，未跟随motor转动。

  可以听到motor运行声，但刀片保持静止，

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。