搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The front work light stays dark during trigger use or remains on abnormally afterward.
The drill works at no load but stalls, slows severely, or stops during drilling or driving.
The trigger binds, the drill runs on, or no-load speed jumps instead of varying smoothly.
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
钻机无法启动，尽管使用了充满电且已知良好的 BATTERY
Pakiet battery nie wsuwa się, nie blokuje, nie zwalnia ani nie pozostaje bezpieczny w uchwycie.
能听到motor声音，但夹头保持静止或仅间歇转动。
钻机在已验证充电电池包下无电机、夹头或工作灯响应。
The forward/reverse lever binds, commands the wrong direction, or center lock fails.
The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
锯片正常但锯发出磨擦、刮擦、敲击或强烈振动声
The tool or pack smokes, leaks, swells, smells burned, overheats severely, or exposes wiring.
The chuck coasts much longer than normal after the trigger is released.
The torque ring binds, will not hold a setting, or slips at clearly wrong torque.
电源断断续续或减弱，出现异常motor噪音，或brush火花过多。
Der obere Wahlschalter klemmt, bleibt nicht im Bereich oder niedrige und hohe Gänge fühlen sich gleich an.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
工作灯亮起但Motor和锯片不启动
fm-p15-b-8295d515: The chuck sleeve or jaws bind, fail to center, trap a bit,
fm-p14-b-387bc595: 扭矩环卡滞，无法保持设定，或打滑。
fm-1-1: FM-01 钻机无法启动，尽管使用了充满电且已知良好的 BATTERY
FM-15: FM-15 钻机磨损、敲击、振动或夹头松动
FM-16: FM-16 出现烟雾、液体、膨胀、燃烧气味或重大损坏
FM-04: FM-04 触发器卡滞、持续运行或速度响应不安全
FM-07: FM-07 齿轮换挡器无法移动、保持或换挡范围
FM-03: FM-03 电池包无法完成正常充电周期
FM-05: FM-05 方向杆卡滞、选择错误或无法锁定关闭
FM-02: FM-02 BATTERY 无法安装、锁定、释放或保持固定
FM-10: FM-10 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD
FM-08: FM-08 离合环无法移动、保持或控制打滑
FM-09: FM-09 THE KEYLESS CHUCK JAWS WILL NOT OPEN, CLOSE, RELEASE, OR GRIP
FM-12: FM-12 钻机堵转、失去动力或负载停止
FM-06: FM-06 电动制动器无法快速停止夹头
FM-11: FM-11 THE MOTOR RUNS BUT THE CHUCK DOES NOT ROTATE
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-15: FM-15 BATTERY 存储断开连接时快速失电
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED