搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

圆柱形电池组在兼容 Bosch 12V Max 工具或认证充电器中，未达到正常就位位置或需异常用力。
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
冲击级1/2英寸套筒无法完全安装、保持或从方形输出驱动拉出。
GBA18V40 开始进入接收轨道，但在达到正常就位和锁定位置前卡滞。
BATTERY SEATS BUT WILL NOT STAY LATCHED
室温下，放置在经过验证的兼容通风充电器中的 battery 在正常静止充电过程中比已知良好的同类 battery 明显发热，但无冒烟、肿胀或熔化现象。
After a normal full charge, the battery loses a large amount of indicated charge or usable low-load runtime while stored by itself in a cool, dry place.
The battery is cool and dry but the outer shell is cracked, split, punctured, missing a piece, or open at a seam, with no smoke, liquid, swelling, odor or dangerous heat.
电池组拆下且冷却后，一个或多个可接触的电源、信号或温度触点明显弯曲、压入、凹坑、松动或腐蚀，但无主动发热、冒烟、液体或熔化现象。
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
One or more green charge-status segments stay on, stay missing, or report an implausible level even though the battery charges and delivers normal low-load runtime.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
钻机无法启动，尽管使用了充满电且已知良好的 BATTERY
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
The cool dry battery shell appears closed, but a new loose rattle, clunk or shifting movement is heard inside after a drop or impact, with no swelling, liquid, smoke, odor or heat.
The pack starts and runs a known-good compatible tool at no load, but output stops promptly during an ordinary matched task that a known-good battery completes.
The cool dry pack has a visibly cracked, missing, loose or distorted rail, release button, latch feature or molded support, whether or not insertion has been attempted.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
A compatible charger continues to report its temperature-delay state after the battery has stabilized at room temperature and the charger works normally with another compatible battery.

故障模式

part