symptom
冲击级1/2英寸套筒无法完全安装、保持或从方形输出驱动拉出。
冲击级1/2英寸套筒无法完全安装， 1. 取出battery，冷却套筒，支撑工具和套筒。
此症状的含义
冲击级1/2英寸套筒无法完全安装， 1. 取出battery，冷却套筒，支撑工具和套筒。
相关故障模式
包含在完整手册中
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。
相关症状和错误代码
Related models
Common symptoms
- 充电、锁定的battery和正常触发命令无旋转、无冲击或无LED。
- battery无法完全滑入手柄、锁定、保持或正常释放。
- 标准1/4英寸动力槽冲击批头无法插入、保持锁定或从六角夹持器释放。
- 空载正常，但批头、套筒或紧固件卡滞、打滑或扭曲工具。
- A seated battery shows no charge response, or charge never reaches a usable full state.
- The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
- The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
- A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.