FM-11: 深度或斜切调节无法移动或固定

深度或斜切调节机构无法移动、锁定或保持设定，导致切割不准确且操作不安全。

• Sawdust or resin is packed in a pivot or scale
• Lever or knob is not fully released or tightened
• Threads, cam, pivot, or scale are worn
• Shoe or linkage is bent from impact
• External adjustment hardware is cracked or missing

1. The shoe moves smoothly when released, locks without slip, and preserves the selected depth and angle.

1. Clean accessible sawdust and resin from the pivot, scale, and external threads with a dry brush and cloth; do not force the mechanism.
2. Set the depth or angle, lock it firmly, and push on the shoe by hand to verify it cannot shift; reject any cracked lever, knob, or bent linkage.
3. If the adjustment remains jammed, stripped, or unable to hold, replace only approved owner-accessible hardware or route the saw to service before cutting.
4. Remove the battery and support the shoe, then release only the depth lever or bevel knob for the adjustment being checked.

这是完整维修手册中所含故障排除指南的预览。

• 外部调节硬件

• 鞋无法旋转或滑动，深度杆或斜切旋钮无法锁定，或操作或切割时设定发生偏移。

  底板无法旋转或滑动，深度杆或斜角旋钮 1. 拆下battery并支撑底板，然后仅释放正在检查的深度杆或斜角旋钮。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。