FM-02: BATTERY无法完全滑入工具导轨

检查。

• Debris or a raised edge blocks a rail or contact channel
• Battery is misaligned or is not a compatible V20 interface
• Battery shell or tool rail support is swollen, cracked, or distorted
• Release latch or contact block is damaged and out of position

1. A compatible battery slides smoothly to the latched position, or the damaged insertion path remains out of service.

1. Dry-clean both rail paths and accessible contacts, then inspect the battery shell and tool foot for burrs, swelling, cracks, melting, or misalignment.
2. Approach the rails straight with a known-good compatible V20 battery and confirm whether it reaches the latch position smoothly.
3. If two sound packs bind at the same point, keep the tool unpowered and route the rail support, contact block, or housing damage to qualified service.
4. Stop pushing and withdraw the binding battery straight off the rails without twisting, striking, or levering it.

这是完整维修手册中所含故障排除指南的预览。

• A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.

  A compatible V20 battery starts onto the tool rails but binds 1. Stop pushing and withdraw the binding battery straight off the rails without

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。