FM-24: 自动主轴锁无法固定卡盘

FM-24

• Spindle has not reached the lock position
• Gear train is between teeth and needs slight hand rotation
• Spindle-lock or gearbox component is worn or broken
• Chuck body is loose on the spindle

1. The spindle lock holds the empty chuck for normal hand tightening and loosening, or the lock fault is proven.

1. Inspect for a loose chuck body, unusual free play, or grinding while keeping the tool unpowered.
2. If the spindle never locks or the chuck body is loose, route the chuck, spindle lock, gearbox, or spindle to service.
3. Remove the battery and test the spindle lock only with an empty chuck.
4. Turn the chuck gently through a small angle, then retry the sleeve so the internal lock can engage.

这是完整维修手册中所含故障排除指南的预览。

• 拆下battery且夹头为空时，转动套筒会自由旋转主轴和motor，而不是提供足够的锁定力以手动紧固或松开夹头。

  拆下battery且卡盘为空时，转动套筒会自由转动主轴和battery，而非提供足够的锁定力以手动紧固或松开卡盘。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。