搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

手册

症状

Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
已裝鋸片鬆動、搖擺、滑動或者偏心運行
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The quick-release collar binds, will not move fully forward, or stays forward after release.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
已裝入充電電池包，但扳機無工作燈、motor聲音或鐵砧動作。
BATTERY WILL NOT CHARGE
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.

故障模式

part