FM-16: 已裝鋸片鬆動、搖擺、滑動或者偏心運行

裝好後鋸片喺主軸位移，明顯左右擺動，負載下滑動，或者唔能保持中心，即使motor 轉動。

• Wrong arbor size, blade diameter, blade type, or damaged blade plate
• Outer washer is reversed, missing, dirty, or not seated
• Clamping screw is loose or clamp/spindle surfaces are damaged
• Blade is bent, cracked, or mounted in the wrong rotation direction

1. With the battery removed, the blade is rigid at the spindle, rotates by hand without lateral runout or guard contact, and remains secure in one controlled cut.

1. Release the trigger at the first wobble or slip, wait for a full stop, remove the battery, and do not make another powered cut.
2. Remove the blade and reject any bent, cracked, chipped, wrong-size, wrong-arbor, abrasive, or unsuitable blade.
3. Clean the spindle and clamp area dry, inspect both washers and the clamping screw, and confirm the large flat washer face is against the blade with the bev
4. Install a verified correct blade in the marked rotation direction and tighten firmly using the blade-lock and wrench procedure.
5. - Hand-turn and visually check clearance and runout - if looseness, slip, or off-center rotation remains, stop and route the spindle/clamp system for authoriz

这是完整维修手册中所含故障排除指南的预览。

• 木材切割圓鋸片
• 鋸片夾緊screw或墊圈
• 齒輪箱、齒輪、軸承或主軸
• 鋸片鎖、鋸片扳手、夾緊screw同墊圈
• 下鋸片護罩、收回桿、樞軸同彈簧
• 齒輪箱、齒輪、軸承同主軸
• 7-1/4吋木材切割鋸片

• 已裝鋸片鬆動、搖擺、滑動或者偏心運行

  裝好後鋸片喺主軸位移，明顯左右擺動，負載下滑動，或者唔能保持中心，即使motor 轉動。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。