搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
The drill works at no load but stalls, slows severely, or stops during drilling or driving.
The forward/reverse lever binds, commands the wrong direction, or center lock fails.
The front work light stays dark during trigger use or remains on abnormally afterward.
The trigger binds, the drill runs on, or no-load speed jumps instead of varying smoothly.
電鑽冇motor、夾頭或工作燈反應，即使用咗已知充滿電嘅battery。
Il grilletto si blocca, il trapano continua a girare o la velocità a vuoto salta invece di variare dolcemente.
motor는 들리지만 척은 움직이지 않거나 간헐적으로만 회전함.
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
Abnormal mechanical noise, strong vibration, or side play remains at no load.
battery唔能滑入、鎖定、釋放或保持穩固喺手柄。
電池包唔能完成充電或運行時間異常短。
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor can be heard, but the front output remains still in both directions with the bit removed.
The chuck coasts much longer than normal after the trigger is released.
The tool or pack smokes, leaks, swells, smells burned, overheats severely, or exposes wiring.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The torque ring binds, will not hold a setting, or slips at clearly wrong torque.
Der obere Wahlschalter klemmt, bleibt nicht im Bereich oder niedrige und hohe Gänge fühlen sich gleich an.
fm-p14-b-387bc595: O anel de torque prende, não mantém a configuração ou escorrega em
fm-p15-b-8295d515: The chuck sleeve or jaws bind, fail to center, trap a bit,
FM-07: FM-07 THE GEAR SHIFTER WILL NOT MOVE, HOLD, OR CHANGE RANGE
FM-11: FM-11 THE MOTOR RUNS BUT THE CHUCK DOES NOT ROTATE
FM-05: FM-05 方向桿卡住、選錯或者唔會鎖定關閉
FM-10: FM-10 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD
FM-03: FM-03 THE BATTERY DOES NOT PROVIDE A NORMAL USABLE CHARGE CYCLE
FM-04: FM-04 THE TRIGGER STICKS, RUNS ON, OR SPEED RESPONSE IS UNSAFE
FM-02: FM-02 THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
FM-06: FM-06 電動剎車唔能快速停止夾頭
FM-08: The torque ring binds, will not hold a setting, or slips at clearly wrong torque.
FM-09: FM-09 THE KEYLESS CHUCK JAWS WILL NOT OPEN, CLOSE, RELEASE, OR GRIP
FM-16: FM-16 FUM, LICHID, UMFLĂTURI, MIROS DE ARS SAU DAUNE MAJORE SUNT PREZENTE
FM-15: FM-15 钻机磨损、敲击、振动或夹头松动
FM-12: FM-12 WIERTARKA ZATRZYMUJE SIĘ, TRACI MOC LUB ZATRZYMUJE POD OBCIĄŻENIEM
fm-1-1: FM-01 THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
FM-02: 电池组无法安装、锁定或释放
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-15: FM-15 BATTERY LOSES CHARGE RAPIDLY WHILE STORED DISCONNECTED
FM-05: Se la sega resta spenta con alimentazione provata e comandi liberi, lasciare l'involucro
brush seco y suave
充滿電嘅已知良好battery
Correct sharp bit
One-half-inch keyless chuck
approved charger
Correct screwdriver
arbetsstycke
En godkänd battery laddare
En rak rundskaftad borrbits
Ett kompatibelt 12V MAX* battery paket
起子頭或者起子頭座
模式或者扭力領圈
充電器同指示燈
相容嘅 battery
可變速扳機
機載鑽頭架
Cool known-good Bosch 18V battery
Correct impact bit
Halbzoll-Schlag-Steckschlüssel
Impact socket