搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
BATTERY WILL NOT SEAT, LATCH, OR RELEASE
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
NO WORKLIGHT OR MOTOR RESPONSE
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.

故障模式

part