搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
El paquete está hinchado, goteando, siseando, humeando, quemándose, aplastado, mojado o abierto.
鋸開動後，扳機保持按住時會斷電
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor can be heard, but the front output remains still in both directions with the bit removed.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
BATTERY WILL NOT CHARGE
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
Charger green LED stays on
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
Chuck clicks while tightening
Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
FM-16: PELIGRO INMEDIATO DE SEGURIDAD DEL BATTERY
FM-03: 鋸開動後，扳機保持按住時會斷電
fm-5-1-2: FM-20 LE BOÎTIER EXTÉRIEUR EST FISSURÉ, FENDU, PERCÉ OU OUVERT À UNE COUTURE
FM-16: FM-16 即時BATTERY、充電器或者工具危險
FM-15: FM-15 BATTERY LOSES CHARGE RAPIDLY WHILE STORED DISCONNECTED
FM-05: Se la sega resta spenta con alimentazione provata e comandi liberi, lasciare l'involucro
FM-22: FM-22 BATTERY O CARICATORE È CALDO, GONFIO, CREPATO, PERDE O FUMA
FM-18: FM-18 PERDITE DI OLIO DAL TAPPO, SERBATOIO O CORPO
FM-21: FM-21 Barra guida, catena della sega, custodia o accessorio di taglio danneggiati
fm-3-1: FM-07 LA GUIDA, LA CATENA O IL COPRIPIGNONE NON SI INSTALLANO O NON SI POSIZIONANO CORRETTAMENTE
FM-02: 电池组无法安装、锁定或释放
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-06: HOT/COLD DELAY REMAINS AFTER THE PACK RETURNS TO ROOM TEMPERATURE
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-27: FM-27 工具或電池包過熱，或者熱量熄火重複發生
fm-3-2: CHARGE-STATUS INDICATOR GIVES NO RESPONSE AFTER A CONFIRMED FULL CHARGE
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-07: 已卡住嘅battery無法鬆開
FM-04: FM-04 鑽頭冷卻時斷電