搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
Il grilletto si blocca, il trapano continua a girare o la velocità a vuoto salta invece di variare dolcemente.
The drill works at no load but stalls, slows severely, or stops during drilling or driving.
The trigger binds, the drill runs on, or no-load speed jumps instead of varying smoothly.
The forward/reverse lever binds, commands the wrong direction, or center lock fails.
The front work light stays dark during trigger use or remains on abnormally afterward.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
電鑽冇motor、夾頭或工作燈反應，即使用咗已知充滿電嘅battery。
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The chuck coasts much longer than normal after the trigger is released.
The tool or pack smokes, leaks, swells, smells burned, overheats severely, or exposes wiring.
motor는 들리지만 척은 움직이지 않거나 간헐적으로만 회전함.
電池包唔能完成充電或運行時間異常短。
battery唔能滑入、鎖定、釋放或保持穩固喺手柄。
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
fm-p15-b-8295d515: The chuck sleeve or jaws bind, fail to center, trap a bit,
fm-p14-b-387bc595: O anel de torque prende, não mantém a configuração ou escorrega em
FM-05: FM-05 方向桿卡住、選錯或者唔會鎖定關閉
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-12: FM-12 WIERTARKA ZATRZYMUJE SIĘ, TRACI MOC LUB ZATRZYMUJE POD OBCIĄŻENIEM
FM-06: FM-06 電動剎車唔能快速停止夾頭
FM-11: FM-11: Charging starts, stays delayed, or never reaches full
FM-09: FM-09 THE KEYLESS CHUCK JAWS WILL NOT OPEN, CLOSE, RELEASE, OR GRIP
FM-10: FM-10 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD
FM-11: FM-11 THE MOTOR RUNS BUT THE CHUCK DOES NOT ROTATE
FM-04: FM-04 THE TRIGGER STICKS, RUNS ON, OR SPEED RESPONSE IS UNSAFE
fm-1-1: FM-01 THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
FM-02: FM-02 THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
FM-16: FM-16 煙、液体、膨張、焦げ臭、または重大な損傷がある
FM-07: FM-07 THE GEAR SHIFTER WILL NOT MOVE, HOLD, OR CHANGE RANGE
FM-08: The torque ring binds, will not hold a setting, or slips at clearly wrong torque.
FM-15: FM-15 钻机磨损、敲击、振动或夹头松动
FM-03: FM-03 THE BATTERY DOES NOT PROVIDE A NORMAL USABLE CHARGE CYCLE
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
充滿電嘅已知良好battery
Charged pack
Known-good charged compatible pack
brush seco y suave
approved charger
Correct screwdriver
Correct sharp bit
One-half-inch keyless chuck
Cool known-good Bosch 18V battery
Eye protection
乾嘅 brush
相容嘅 battery
起子頭或者起子頭座
充電器同指示燈
可變速扳機
模式或者扭力領圈
機載鑽頭架
Halbzoll-Schlag-Steckschlüssel
Resirkuleringsrute for skadet litium
Correct impact bit