搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
扳機回彈同motor停止，但LED保持亮起超過大約20秒。
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
Piła wydaje nowe dźwięki szlifowania, stukania, stukanie lub silne wibracje podczas pracy bez obciążenia lub cięcia.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
工作燈失效、閃爍或者持續亮過正常延遲時間
已裝入充電電池包，但扳機無工作燈、motor聲音或鐵砧動作。
The motor can be heard, but the front output remains still in both directions with the bit removed.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
Chuck clicks while tightening
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
The quick-release collar binds, will not move fully forward, or stays forward after release.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
Charger green LED stays on
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Unit shuts off abruptly
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
FM-13: 工作燈持續亮超過正常餘光時間
FM-12: 工作燈失效、閃爍或者持續亮過正常延遲時間
FM-20: FM-20 异常磨损、响声或剧烈振动
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-05: Se la sega resta spenta con alimentazione provata e comandi liberi, lasciare l'involucro
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-04: FM-04 鑽頭冷卻時斷電
FM-05: FM-05 扳機卡住或速度控制唔安全
FM-11: FM-11 正確設置下速度或扭力低
FM-12: FM-12 鑽頭卡住、卡死或扭轉電鑽
FM-16: FM-16 即時BATTERY、充電器或者工具危險
FM-27: FM-27 工具或電池包過熱，或者熱量熄火重複發生
FM-08: FM-08 LA CATENA È ALLENTATA, CEDIMENTI O NON TIENE LA TENSIONE
FM-12: FM-12 LA CATENA SI MUOVE MA NON TAGLIA PERCHÉ È INSTALLATA AL CONTRARIO
FM-15: FM-15 LA CATENA SALTA O DERAGLIA DURANTE L'USO
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-18: FM-18 PERDITE DI OLIO DAL TAPPO, SERBATOIO O CORPO
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
Motor atau gearbox
ידית, מגן או מארז מבני
arbetsstycke
En godkänd battery laddare
En rak rundskaftad borrbits
Ett kompatibelt 12V MAX* battery paket
相容嘅 battery
Cool known-good Bosch 18V battery
Correct impact bit
Halbzoll-Schlag-Steckschlüssel
Impact socket
Resirkuleringsrute for skadet litium
起子頭或者起子頭座
充電器同指示燈
可變速扳機
模式或者扭力領圈
機載鑽頭架